Matthews Studio Equipment 169029 24x72" Floppy Cutter

148.75
  • Filmtools #: 10342
  • Mfr #: 169029
Availability
Not Eligible For Free Shipping
Product Features
  • 24" x 72" Cutter
  • Single, horizontally angled support arm for 'close-in', right angle, tight positioning
  • Interlocking of flags establish tightly controlled spread of light
  • Used to control natural or artificial light
  • Heavy duty color coded webbing

Availability: In stock

Regular Price: $175.00
Instant Savings: $26.25
You Pay: $148.75
Have a Question?

Call us at 1.888.807.1900

  • Overview

    The Matthews 24" x 72" Floppy Cutter Opens on the 72" side only. Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material.

    Used to control light, whether natural or artificial. Flags can be used to protect the camera lens from flares or to control spill light from other sources, or keep light from reaching certain areas on the set. Known as Flags up to sizes 24"x36", larger or more irregular sizes are referred to as Cutters, Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with hook and loop fasteners until needed at which time the Flag or Cutter becomes twice its original size. Use the number with a (B) after it for Bottom Hinge and the number with a (T) after it to specify Top Hinge. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing. MSE #169029

  • Specs

    Fabric: Solid Black
    Size: 24" x 72" (61 x 183cm)
    Shape: Rectangular

  • In The Box

    Matthews Studio Equipment 169029 24x72" Floppy Cutter

The Matthews 24" x 72" Floppy Cutter Opens on the 72" side only. Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material.

Used to control light, whether natural or artificial. Flags can be used to protect the camera lens from flares or to control spill light from other sources, or keep light from reaching certain areas on the set. Known as Flags up to sizes 24"x36", larger or more irregular sizes are referred to as Cutters, Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with hook and loop fasteners until needed at which time the Flag or Cutter becomes twice its original size. Use the number with a (B) after it for Bottom Hinge and the number with a (T) after it to specify Top Hinge. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing. MSE #169029