Arri 552200 10" 2000W True Blue ST2 Studio Fresnel Light - Stand Mount

1500
  • Filmtools #: 4883
  • Mfr #: L1.40750.A
Special Order
Product Features
  • Pressure die cast and extruded aluminum components reduce the overall weight
  • Many components offer greater strength and resistance to corrosion
  • Improved (optional) barndoors are stronger
  • New hinge design maintains constant tension
  • Stirrup mounting slides can be adjusted
  • Extruded aluminum is stronger, lighter and less bulky
  • Soft contour makes it comfortable to carry

Availability: In stock

You Pay: $1,500.00
Have a Question?

Call us at 1.888.807.1900

  • Overview

    Arri True BlueST2 2000W Studio Fresnel 10" Lens (Stand Model) is part of the ARRI TRUE BLUE line of fresnel fixtures which represent an unprecedented evolution of the studio fixtures that have been popular workhorses for over two decades. Following extensive research and feedback from lighting professionals around the world, combined with advances in technology, ARRI has designed a series of six highly innovative lampheads with over 30 new improvements for studio and location lighting.

    While the overall weight of the TRUE BLUE fixtures has been reduced, there have been no sacrifices to quality; in fact many components now offer greater strength and resistance to corrosion. Maintenance and repair are facilitated by simplified access to internal components, and the smooth lamp housing surfaces are now easier to clean.

    One particular focus of enhancements to the lampheads has been their adaptability to accessories. The tilt lock has been dramatically improved by a stainless steel friction disc that locks tight to eliminate the danger of forward tilting when heavy, front-mounted accessories are in use. In addition, a new stirrup center adjustment allows the lamphead to slide until its center of gravity is either at or near the tilt lock, depending on the accessories attached.

    The new Stegmaier connector, a rotatable cable outlet, permits swift adjustment between ideal cable orientations for both ceiling-grid and floor-stand mounting. Improved barndoors are stronger, less susceptible to bending, and can be inserted vertically without being damaged when the lamphead is placed on a flat surface.

    ARRIメs new patented cross cooling system, which encourages a stream of air to pass around the Fresnel lens and into the lamphead from the front, has reduced the lamp housing temperature of TRUE BLUE units by 25% and the lens temperature by 17%.

    General Features:

    • Pressure die cast and extruded aluminum components reduce the overall weight
    • Many components offer greater strength and resistance to corrosion
    • Patent-pending connector and strain relief rotate to allow the cable orientation to be quickly adjusted for hanging or stand mounting
    • Improved (optional) barndoors are stronger and less susceptible to bending
    • New hinge design maintains constant tension and may be easily adjusted
    • Stirrup mounting slides can be adjusted to counterbalance all accessories
    • Extruded aluminum is stronger, lighter and less bulky but still permits full fixture rotation
    • Soft contour makes it comfortable to carry
    • Stainless steel friction disc locks the lamphead securely even with the largest Chimera or other accessories
    • Routine maintenance and repair are easier with fast, simple access to all internal components
    • Smooth lamp housing surfaces make cleaning easier
    • Meets IP23 standard - suitable for indoor use or outdoor use providing a degree of protection against falling rain (up to a 60deg. angle from vertical)
    • CE declaration and independently assessed TUV certification
    • The laser cut hexagonal safety mesh withstands location abuse

     

    Watch ARRI True Blue Overview Videos
  • Specs

    Rating: 2000 watts, 120-240VAC
    Socket (Lampholder): G38 Bi Pin
    Lens (Condenser): 10" (250mm) low expansion borosilicate Fresnel lens
    Reflector (Mirror): Spherical specular high purity aluminum
    Mounting: 1-1/8" Junior spigot
    Yoke: Tubular
    Cable: 5' (1.5 m) Power Cable, no plug
    Focusing: Front and rear mounted knobs
    Weight: 23.3 lbs (10.6kg)
    Dimensions: 26.1 x 11 x 15" (66.3 x 28 x 38cm) (HxWxD) including yoke and mount

  • In The Box
    • Arri ST-2 2000 Watts Studio Fresnel Light
    • 3.0 ft. (1.0 m) Cable without Plug

Arri True BlueST2 2000W Studio Fresnel 10" Lens (Stand Model) is part of the ARRI TRUE BLUE line of fresnel fixtures which represent an unprecedented evolution of the studio fixtures that have been popular workhorses for over two decades. Following extensive research and feedback from lighting professionals around the world, combined with advances in technology, ARRI has designed a series of six highly innovative lampheads with over 30 new improvements for studio and location lighting.

While the overall weight of the TRUE BLUE fixtures has been reduced, there have been no sacrifices to quality; in fact many components now offer greater strength and resistance to corrosion. Maintenance and repair are facilitated by simplified access to internal components, and the smooth lamp housing surfaces are now easier to clean.

One particular focus of enhancements to the lampheads has been their adaptability to accessories. The tilt lock has been dramatically improved by a stainless steel friction disc that locks tight to eliminate the danger of forward tilting when heavy, front-mounted accessories are in use. In addition, a new stirrup center adjustment allows the lamphead to slide until its center of gravity is either at or near the tilt lock, depending on the accessories attached.

The new Stegmaier connector, a rotatable cable outlet, permits swift adjustment between ideal cable orientations for both ceiling-grid and floor-stand mounting. Improved barndoors are stronger, less susceptible to bending, and can be inserted vertically without being damaged when the lamphead is placed on a flat surface.

ARRIメs new patented cross cooling system, which encourages a stream of air to pass around the Fresnel lens and into the lamphead from the front, has reduced the lamp housing temperature of TRUE BLUE units by 25% and the lens temperature by 17%.

General Features:

  • Pressure die cast and extruded aluminum components reduce the overall weight
  • Many components offer greater strength and resistance to corrosion
  • Patent-pending connector and strain relief rotate to allow the cable orientation to be quickly adjusted for hanging or stand mounting
  • Improved (optional) barndoors are stronger and less susceptible to bending
  • New hinge design maintains constant tension and may be easily adjusted
  • Stirrup mounting slides can be adjusted to counterbalance all accessories
  • Extruded aluminum is stronger, lighter and less bulky but still permits full fixture rotation
  • Soft contour makes it comfortable to carry
  • Stainless steel friction disc locks the lamphead securely even with the largest Chimera or other accessories
  • Routine maintenance and repair are easier with fast, simple access to all internal components
  • Smooth lamp housing surfaces make cleaning easier
  • Meets IP23 standard - suitable for indoor use or outdoor use providing a degree of protection against falling rain (up to a 60deg. angle from vertical)
  • CE declaration and independently assessed TUV certification
  • The laser cut hexagonal safety mesh withstands location abuse

 

Watch ARRI True Blue Overview Videos