Azden WLX-PRO VHF Wireless Lavalier Microphone Receiver & Transmitter Kit

149
  • Filmtools #: 26403
  • Mfr #: WLX-PRO
Availability
Product Features
  • Belt-pack transmitter
  • Electret con-denser lavalier microphone
  • WR-PRO receiver
  • Shoe-mount
  • Hook-and-loop fastener
  • EX-503 lavalier microphone

Availability: In stock

Regular Price: $220.00
Instant Savings: $71.00
You Pay: $149.00
Have a Question?

Call us at 1.888.807.1900

  • Overview

    The Azden WLX-PRO Lavalier microphone system is a complete system which includes the WL/T-PRO, belt-pack transmitter (WM-PRO) with electret con-denser lavalier microphone (EX-503), and the WR-PRO receiver, which comes with both shoe-mount and hook-and-loop fastener. This VHF based wireless system is an ideal affordable solution for those needing a wireless lav system, or as a back-up for your RF wirelss system. Wireless audio solutions are prone to interference, but the Azden VHF wireless sytems use frequencies in a range that are not normally used for other applications. If you experience trouble with other systems you can hook up your Azden kit and start recording high quality audio.

     

    The EX-503 lavalier microphone features an omni-directional pattern for a wide pick up area.

     

    All receivers and transmitters in the “PRO” Series are on the same 2 frequencies (169.445MHz and 170.245MHz) and use the same circuitry, making them interchangeable, and allowing you to add to your system at any time.

  • Specs
    System
    Type of System Camera Mountable VHF Wireless
    RF Carrier Frequency Range 2 Switchable Frequencies
    Approx. Working Range Up to and Possibly Greater than 200' Under Ideal Conditions
    Overall Frequency Response Not Specified by Manufacturer
    Signal-to-Noise Ratio Not Specified by Manufacturer
    Number Of Channels 2 Switchable
    Number Of Simultaneous Systems 2
    Receiver
    Type of Receiver Camera Mountable Super-heterodyne VHF
    Type of Outputs 1/8" Mini
    Headphone Monitoring Yes, (Ear-piece Included)
    Power Requirements 9v Battery
    Battery Type/Approx. Life 9v, (Battery Life NOT Specified by Manufacturer)
    Display No
    Mounting Options Belt, or Camera Mount
    Antenna Type Flexible Wire
    Dimensions (WxHxD) 2.4 x 3.3 x 0.85 " (60 x 86 x 21.5mm)
    Weight 4.5 oz (128 g) With Battery
    Transmitter
    Type of Transmitter Body-pack FM Emission VHF
    Type of Input Connector 1/8" Mini-Plug
    Type of Microphone Azden Lavalier
    Polar Pattern Omni-directional
    Interchangeable Mic Heads No
    Battery Type/Approx. Life 9v Battery / (Battery Life NOT Specified by Manufacturer)
    Mute Switch Yes (Standby)
    Level Control Yes, Not Specified by Manufacturer
    Antenna Type External Flexible Wire
    Display No LCD display not available
    Dimensions (WxHxD) 2.4 x 3.3 x 0.85 " (60 x 86 x 21.5mm)
    Weight 3.4 oz (98 g) With Battery
  • In The Box

    Includes:

    • 1 WM-PRO Wireless Transmitter
    • 1 WR-PRO Wireless Receiver
    • 1 EX-503 Lavalier Microphone
    • 1 Shoe Mount for Receiver
    • 1 Ear Piece Monitor
    • 1 Windscreen
    • 1 3.5mm Audio Cable (Male to Male) for connecting receiver to camera

The Azden WLX-PRO Lavalier microphone system is a complete system which includes the WL/T-PRO, belt-pack transmitter (WM-PRO) with electret con-denser lavalier microphone (EX-503), and the WR-PRO receiver, which comes with both shoe-mount and hook-and-loop fastener. This VHF based wireless system is an ideal affordable solution for those needing a wireless lav system, or as a back-up for your RF wirelss system. Wireless audio solutions are prone to interference, but the Azden VHF wireless sytems use frequencies in a range that are not normally used for other applications. If you experience trouble with other systems you can hook up your Azden kit and start recording high quality audio.

 

The EX-503 lavalier microphone features an omni-directional pattern for a wide pick up area.

 

All receivers and transmitters in the “PRO” Series are on the same 2 frequencies (169.445MHz and 170.245MHz) and use the same circuitry, making them interchangeable, and allowing you to add to your system at any time.