Benro BV6 Twin Leg Aluminum Tripod Kit

549
  • Filmtools #: 51286
  • Mfr #: BV6
In Stock
Product Features
  • Supports up to 13.2 lb
  • 8-step (0 to 7) counterbalance
  • Independent 4-step (0 to 3) pan and tilt drag
  • -60° to +90° tilt range
  • Manfrotto 501/504PL compatible sliding plate
  • Two 3/8"-16 accessory threads
  • Twin leg aluminum tripod with 100mm bowl fitting
  • 30.3 to 65" height range
  • Adjustable/removable mid-level spreader
  • Dual spiked feet with removable rubber pads

Availability: In stock

Regular Price: $814.00
Instant Savings: $265.00
You Pay: $549.00
Have a Question?

Call us at 1.888.807.1900

  • Overview

    The Benro BV6 Twin Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling camera rigs weighing up to 13.2 pounds. The kit pairs the 75mm-ball BV6 video head with a twin leg aluminum tripod. The BV6 head features a 8-step counterbalance system to dial in the correct amount for your set-up, and independent 4-step pan and tilt drag settings for precise control over camera movements. A Manfrotto 501/504PL compatible sliding quick-release plate is provided. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. For added versatility, the 75mm-ball tiedown stud is removable to convert the head to a flat base for use on a slider or other support device.

    The 2-stage, 3-section twin leg aluminum tripod incorporates a 75mm bowl and offers sturdy support for the BV6 head. It features oversized quick positive leg locks for simple and fast setup, an adjustable/removable mid-level spreader, and dual spike feet with removable rubber pads. The tripod system extends to a maximum height of 65", while getting as low as 30.3". A carry case and shoulder strap are included.

    Benro BV6 Twin Leg Aluminum Tripod Head

    • Supports up to 13.2 lb
    • Removable tiedown stud to convert to flat base head
    • 8-step (0 to 7) counterbalance
    • Independent 4-step (0 to 3) pan and tilt drag
    • -60° to +90° tilt range
    • Manfrotto 501/504PL compatible sliding plate
    • Two 3/8"-16 accessory threads for mounting accessories, such as monitor or recorder
    • Bubble level

    Benro BV6 Twin Leg Aluminum Tripod Legs

    • Twin leg aluminum tripod with 100mm bowl fitting
    • 30.3 to 65" height range (with head attached)
    • Oversized twist lever leg locks
    • Adjustable/removable mid-level spreader
    • Dual spiked feet with removable robber pads
  • Specs

    Head

    • Load Capacity: 13.2 lb (6 kg)
    • Head Mount: 75 mm bowl
    • Counterbalance: 8-step (0 to 7)
    • Pan Drag: 4-step (0 to 3) fluid cartridge
    • Tilt Drag: 4-step (0 to 3) fluid cartridge
    • Panning Range: 360°
    • Tilt Range: -60° to +90°
    • Quick Release Plate: QR13 (Manfrotto 501/504PL compatible), 1/4"-20 and 3/8"-16 cameras screws
    • Accessory Mounting Threads: 2 x 3/8"-16

    Legs

    • Material: Aluminum
    • Stages: 2
    • Sections: 3

    General

    • Minimum Height: 30.3" (76.9 cm)
    • Maximum Height: 65" (165.1 cm), at 24° leg angle with column extended
    • Folded Length: 32.8" (83.2 cm)
    • Weigh: 10.8 lb (4.9 kg)
  • In The Box
    •  QR13 Quick Release Plate
    • BS02 Pan Bar Handle
    • ML08 Mid-Level Spreader for H-Series Twin Leg Tripods
    • 3 x SP02 Rubber Pivot Foot for H-Series Twin Leg Tripods
    • Carry Case
    • Strap
    • Limited 3-Year Warranty (Extendable to 5-Year with Online Product Registration)

The Benro BV6 Twin Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling camera rigs weighing up to 13.2 pounds. The kit pairs the 75mm-ball BV6 video head with a twin leg aluminum tripod. The BV6 head features a 8-step counterbalance system to dial in the correct amount for your set-up, and independent 4-step pan and tilt drag settings for precise control over camera movements. A Manfrotto 501/504PL compatible sliding quick-release plate is provided. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. For added versatility, the 75mm-ball tiedown stud is removable to convert the head to a flat base for use on a slider or other support device.

The 2-stage, 3-section twin leg aluminum tripod incorporates a 75mm bowl and offers sturdy support for the BV6 head. It features oversized quick positive leg locks for simple and fast setup, an adjustable/removable mid-level spreader, and dual spike feet with removable rubber pads. The tripod system extends to a maximum height of 65", while getting as low as 30.3". A carry case and shoulder strap are included.

Benro BV6 Twin Leg Aluminum Tripod Head

  • Supports up to 13.2 lb
  • Removable tiedown stud to convert to flat base head
  • 8-step (0 to 7) counterbalance
  • Independent 4-step (0 to 3) pan and tilt drag
  • -60° to +90° tilt range
  • Manfrotto 501/504PL compatible sliding plate
  • Two 3/8"-16 accessory threads for mounting accessories, such as monitor or recorder
  • Bubble level

Benro BV6 Twin Leg Aluminum Tripod Legs

  • Twin leg aluminum tripod with 100mm bowl fitting
  • 30.3 to 65" height range (with head attached)
  • Oversized twist lever leg locks
  • Adjustable/removable mid-level spreader
  • Dual spiked feet with removable robber pads