Element Technica Micron LW15 Studio Lens Support

450
  • Filmtools #: 23563
  • Mfr #: EL-ULS-LW15
Quote Only
Product Features
  • Top mounting quick-release
  • Locking slider
  • Works natively on Micron Standard or LW15 standard accessory

Availability: Out of stock

You Pay: $450.00
Have a Question?

Call us at 1.888.807.1900

  • Overview

    The Element Technica Micron LW15 Studio Lens Support is a bridging device that straddles both BridgePlate mounted iris rods in order to mechanically support heavy lenses. The Lens Support is designed to be used in Micron LW15 configurations. The Element Technica Micron LW15 Lens Support was developed as a universal, quick-release component which does not require tools to install, a simple cam lever is used to lock and unlock, nor does it require removing the matte box or lens drives in order to add to the iris rods.

    The Element Technica Micron LW15 Lens Support comes with a 1/4"-20 tie-down screw and a 3/8"-16 reducer in order to accommodate all available lens configurations. The tie-down is a tool-less thumbscrew design.  The center locking support allows horizontal travel of 9.5mm and vertical travel of 4.75mm. This is to allow adjustment for the tie-down screw to reach the lens' support mount.

The Element Technica Micron LW15 Studio Lens Support is a bridging device that straddles both BridgePlate mounted iris rods in order to mechanically support heavy lenses. The Lens Support is designed to be used in Micron LW15 configurations. The Element Technica Micron LW15 Lens Support was developed as a universal, quick-release component which does not require tools to install, a simple cam lever is used to lock and unlock, nor does it require removing the matte box or lens drives in order to add to the iris rods.

The Element Technica Micron LW15 Lens Support comes with a 1/4"-20 tie-down screw and a 3/8"-16 reducer in order to accommodate all available lens configurations. The tie-down is a tool-less thumbscrew design.  The center locking support allows horizontal travel of 9.5mm and vertical travel of 4.75mm. This is to allow adjustment for the tie-down screw to reach the lens' support mount.