Gripper 115 XL - The Filmtools XL In-Car Windshield Camera Mount w/ 3.5" & 6" Rod

112
  • Filmtools #: 12851
  • Mfr #: 115 XL
In Stock
Product Features
  • Mounts on windshields, windows or any non-porous surface by pumping the plunger on the vacuum cup until the red ring is no longer visible
  • Supports a 70 pound load, even though the actual camera mount is guaranteed up to 9 pounds. 
  • The Mount comes with a 3.5" and 6" extension post
  • Great and practical mount for Mini DV and small HD-Cams
  • Can be mounted on the cars outer surface as well

Availability: In stock

Regular Price: $147.50
Instant Savings: $35.50
You Pay: $112.00
Have a Question?

Call us at 1.888.807.1900

  • Overview
    The Filmtools Gripper 115 XL Vacuum Cup Camera Mount mounts on windshields, windows or any non-porous surface by pumping the plunger on the vacuum cup until the red ring is no longer visible. This vacuum will support a 70 pound load, even though the actual camera mount is guaranteed up to 9 pounds. Safety-point: Never leave a vacuum mount unattended.

    Your camera locks in to this reliable setup with its standard 1/4-20 mounting hardware. The Manfrotto Double Ball Joint is attached to the Wood's vacuum cup with a 3/8-16 receiver, unlike the Nukklehead LJ45PH155 which uses a 1/4-20 connection- twice as strong as that of our competitor's suction cup, which uses only a 1/4-20" spud.

    The Filmtools Gripper 115 XL camera mount is a great and practical mount for Mini DV and small HD-Cams. It can also be mounted on the car's outer surface as well.

    Note: Sony camera not included.

    Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Powr-Gripᆴ vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface--thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used on materials of almost any thickness with little risk of damage.

    The vacuum cup's pump features a plunger with a red line, which serves as a vacuum indicator. Introduced by Wood's Powr-Grip in the 1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates that air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re-pump the cup without losing the remaining vacuum.

    Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely.

    Guide to Maintenance, Troubleshooting, and Repair

    Please Note: It is important to protect the edges of your suction cup, failure to do so may result in a micro serration which will cause it to lose suction quickly.

The Filmtools Gripper 115 XL Vacuum Cup Camera Mount mounts on windshields, windows or any non-porous surface by pumping the plunger on the vacuum cup until the red ring is no longer visible. This vacuum will support a 70 pound load, even though the actual camera mount is guaranteed up to 9 pounds. Safety-point: Never leave a vacuum mount unattended.

Your camera locks in to this reliable setup with its standard 1/4-20 mounting hardware. The Manfrotto Double Ball Joint is attached to the Wood's vacuum cup with a 3/8-16 receiver, unlike the Nukklehead LJ45PH155 which uses a 1/4-20 connection- twice as strong as that of our competitor's suction cup, which uses only a 1/4-20" spud.

The Filmtools Gripper 115 XL camera mount is a great and practical mount for Mini DV and small HD-Cams. It can also be mounted on the car's outer surface as well.

Note: Sony camera not included.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Powr-Gripᆴ vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface--thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used on materials of almost any thickness with little risk of damage.

The vacuum cup's pump features a plunger with a red line, which serves as a vacuum indicator. Introduced by Wood's Powr-Grip in the 1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates that air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re-pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely.

Guide to Maintenance, Troubleshooting, and Repair

Please Note: It is important to protect the edges of your suction cup, failure to do so may result in a micro serration which will cause it to lose suction quickly.