HIVE LIGHTING Wasp Plasma PAR Light Kit with Hard Rolling Case

3850.58
  • Filmtools #: 52445-PROMO
  • Mfr #:
Availability
Product Features
  • Wasp Plasma PAR Light Head
  • Wasp AC Power Supply
  • 15' Header Cable
  • Four-Piece PAR Lens Set
  • Five-Piece Scrim Kit
  • Four-Leaf Barndoor Set
  • Hive Lighting Wasp One Light Hard Rolling Case

Availability: In stock

You Pay: $3,850.58
Have a Question?

Call us at 1.888.807.1900

  • Overview

    The Hive Lighting Wasp Plasma PAR Light Kit is the most versatile light source that can be plugged into the wall. The light source functions as a micro-star, the Wasp is a Par, a Leko Spot, a Maxi, fits 4 point and eight point softboxes, photo umbrellas, traditional glass lenses and Hive’s unique HDP lenses with a single plasma light builb. The Lighting kit features Adjustable color temperature between 4600K – 7000K CCT, easily powered with 90-277VAC or 18-38VDC. The bulb is flicker free, has a 10,000 hour life, is vibration and impact resistant, and capable of producing output equivalent of 400 – 4,000 Watt HMIs depending on accessories.

    The HIVE LIGHTING Wasp One Light Hard Rolling Case is an injection molded case with custom-fit foam is designed for Hive Killer and Bumblebee Lighting Kits. The foam inside is cut to hold the above kits but can be removed to suit your needs. This gasketed, waterproof, airtight case is designed to be unbreakable due to its high-strength polypropylene copolymer resin construction. Submersible by design, the Wasp hard case is resistant to corrosion and damage upon impact.

    Featuring a continuous hinge molded into the plastic, the case lacks a weak point. The pressure equalization valve will aid in any necessary shipment, as it will release pressure without letting any water into the case. Along with the trigger release latch system, your light kit will be secure in nearly every kind of transit condition. Additional security is provided by two reinforced steel locking holes preventing any cutting or clipping.

    For added convenience when transporting your kit, the Hive Hard Case has a wide set of built-in inline wheels complimented by an injection molded pull handle. To balance a heavy load, utilize either the top snap-down rubber over-molded cushion grip handle or the over-sized double grip carrying handle on the side. If you need to carry the case with another person, it is equipped with grip handles on each end. After setting up your lights on set or location, easily stack your hard cases on top of each other to maximize your production space.

  • Specs

    OUTPUT

    • 5600K CCT (Nominal daylight)
    • 94+ CRI
    • Full Spectrum (see graphic)
    • Flicker Free (450 MHz cycle, 225 Million fps)

    POWER

    • 90 – 277V AC (with Hive Lighting AC power supply)
    • 18 – 38V DC (with Hive Lighting AC & DC power supply)
    • 276 Total System Watts
    • 2.3 Amps (120ACV) / 9.8 Amps (28DCV)

    DIMENSIONS

    • 11.5 lbs ( 5.2 kg)
    • 10.5” x 9.8” x 11” (266mm x 248mm x 280mm)
    • 14.5” (368mm) from pin receiver to yoke mount
    • “Baby” (16mm) TVMP receiver
    • 6-5/8” or 6 1/2“ (170 mm or 165mm) sized accessories

    OPERATING

    • Daylight Dial 4600K - 7000K (Plus Moonlight EFX)
    • DMX512 (optional)
    • 30,000 Hour Hive Recommend Bulb Life (50,000 hours L70)
    • Minimum Recommended Ambient Temp: - 31F (- 35C)
    • Maximum Recommended Ambient Temp: 110F (43C)
    • Max Operating Altitude 30,000 ft. (9,144 m)


    HIVE LIGHTING Wasp One Light Hard Rolling Case

    • Material Exterior: Ultra high-strength polypropylene; copolymer resin; Rubber; Foam
    • Type of Closure: Patented "trigger release" latch system
    • Carrying/Transport Options: 1 x Snap-down rubber over-molded grip handle; 1 x Oversized double grip handle; 2 x Grip handles for a two person carry; 1 x Injection molded pull handle; 1 x Wide set of double wheels
    • Design: Wheeled hard resin case
    • Interior Fitting: Custom foam
    • Exterior Dimensions: 22.3 x 18.8 x 12" (56.6 x 47.6 x 30.5 cm)
    • Interior Dimensions: 20.5 x 15.5 x 10" (52 x 39.4 x 25.4 cm)
    • Weight: 14 lb (6.4 kg)
  • In The Box
    • Wasp Plasma PAR Light Head
    • Wasp AC Power Supply
    • 15' Header Cable
    • Four-Piece PAR Lens Set
    • Five-Piece Scrim Kit
    • Four-Leaf Barndoor Set
    • Hive Lighting Wasp One Light Hard Rolling Case

The Hive Lighting Wasp Plasma PAR Light Kit is the most versatile light source that can be plugged into the wall. The light source functions as a micro-star, the Wasp is a Par, a Leko Spot, a Maxi, fits 4 point and eight point softboxes, photo umbrellas, traditional glass lenses and Hive’s unique HDP lenses with a single plasma light builb. The Lighting kit features Adjustable color temperature between 4600K – 7000K CCT, easily powered with 90-277VAC or 18-38VDC. The bulb is flicker free, has a 10,000 hour life, is vibration and impact resistant, and capable of producing output equivalent of 400 – 4,000 Watt HMIs depending on accessories.

The HIVE LIGHTING Wasp One Light Hard Rolling Case is an injection molded case with custom-fit foam is designed for Hive Killer and Bumblebee Lighting Kits. The foam inside is cut to hold the above kits but can be removed to suit your needs. This gasketed, waterproof, airtight case is designed to be unbreakable due to its high-strength polypropylene copolymer resin construction. Submersible by design, the Wasp hard case is resistant to corrosion and damage upon impact.

Featuring a continuous hinge molded into the plastic, the case lacks a weak point. The pressure equalization valve will aid in any necessary shipment, as it will release pressure without letting any water into the case. Along with the trigger release latch system, your light kit will be secure in nearly every kind of transit condition. Additional security is provided by two reinforced steel locking holes preventing any cutting or clipping.

For added convenience when transporting your kit, the Hive Hard Case has a wide set of built-in inline wheels complimented by an injection molded pull handle. To balance a heavy load, utilize either the top snap-down rubber over-molded cushion grip handle or the over-sized double grip carrying handle on the side. If you need to carry the case with another person, it is equipped with grip handles on each end. After setting up your lights on set or location, easily stack your hard cases on top of each other to maximize your production space.