Inovativ Pro DigiTech Bundle - MacBook Air

1159
  • Filmtools #: 50977
  • Mfr #: 501-505
Availability
Product Features
  • DigiPlate Pro
  • DigiShade Pro
  • DigiMousePad
  • DigiLegs
  • DigiBase (Baby-Pin Mount)
  • Accessory Clamps (1-1.5" Base)

Availability: In stock

You Pay: $1,159.00
Have a Question?

Call us at 1.888.807.1900

  • Overview

    The Inovativ DigiPlate Pro is based on the tried and true “cheese plate” design used by professional photographers and cinematographers. With 161 holes tapped at the very common 3/8-16 thread size, the DigiPlate Pro is virtually limitless when it comes to expandability.

    The Inovativ DigiShade Pro features an ultra lightweight aluminum frame that attaches right to the DigiPlate Pro and does not interfere with any other DigiPlate functions. The tall front opening says “goodbye” to the days of constantly being crouched over when using inferior shades. The water repellent Cordura shade features a pop out rear back to allow for tilting your laptop display and also a removable front viewing panel for those ultra sunny locations like the beach and snow.

    The Inovativ Accessory Clamps clamps keep your hard drives and accessories secured to the DigiPlate. The cheese plate design allows the clamps to be positioned in many different configurations. Each clamp is secured to the DigiPlate using large thumb screws making clamping both easy on the fingers and very secure. The custom rubber pads make sure your accessories will not slip out from underneath. Clamps come in two sizes to accommodate most accessories. Clamps come with shims to make them height adjustable.

    The Inovativ DigiMousePad is an extension that attaches to either side of the DigiPlatePro and gives you a surface for a traditional mouse.

    The Inovativ DigiBase is a baby-pin mount which allows you to mount the DigiPlatePro and DigiPlateLite to anything with a baby-pin including C-stands, light stands, clamps, Magic Arms, etc. There are dozens of existing third-party accessories equipped with baby-pins ready for the DigiPlate.

    The Inovativ DigiLegs create a “table” out of the DigiPlate. This is especially handy when you have items like the DigiBase and hard drives mounted to the bottom of the DigiPlate. Those items make the bottom uneven when not mounted on a stand or a tripod. The legs elevate those items and help you level out the DigiPlate. The bottom of the legs have rubber pads for stability and to help prevent scratches on delicate surfaces. Why only three legs? Three legs eliminates the rocking created by uneven surfaces—think four-legged chair on an uneven floor.

    Comes with

    • DigiPlate Pro
    • DigiShade Pro
    • DigiMousePad
    • DigiLegs
    • DigiBase (Baby-Pin Mount)
    • Accessory Clamps (1-1.5" Base)

The Inovativ DigiPlate Pro is based on the tried and true “cheese plate” design used by professional photographers and cinematographers. With 161 holes tapped at the very common 3/8-16 thread size, the DigiPlate Pro is virtually limitless when it comes to expandability.

The Inovativ DigiShade Pro features an ultra lightweight aluminum frame that attaches right to the DigiPlate Pro and does not interfere with any other DigiPlate functions. The tall front opening says “goodbye” to the days of constantly being crouched over when using inferior shades. The water repellent Cordura shade features a pop out rear back to allow for tilting your laptop display and also a removable front viewing panel for those ultra sunny locations like the beach and snow.

The Inovativ Accessory Clamps clamps keep your hard drives and accessories secured to the DigiPlate. The cheese plate design allows the clamps to be positioned in many different configurations. Each clamp is secured to the DigiPlate using large thumb screws making clamping both easy on the fingers and very secure. The custom rubber pads make sure your accessories will not slip out from underneath. Clamps come in two sizes to accommodate most accessories. Clamps come with shims to make them height adjustable.

The Inovativ DigiMousePad is an extension that attaches to either side of the DigiPlatePro and gives you a surface for a traditional mouse.

The Inovativ DigiBase is a baby-pin mount which allows you to mount the DigiPlatePro and DigiPlateLite to anything with a baby-pin including C-stands, light stands, clamps, Magic Arms, etc. There are dozens of existing third-party accessories equipped with baby-pins ready for the DigiPlate.

The Inovativ DigiLegs create a “table” out of the DigiPlate. This is especially handy when you have items like the DigiBase and hard drives mounted to the bottom of the DigiPlate. Those items make the bottom uneven when not mounted on a stand or a tripod. The legs elevate those items and help you level out the DigiPlate. The bottom of the legs have rubber pads for stability and to help prevent scratches on delicate surfaces. Why only three legs? Three legs eliminates the rocking created by uneven surfaces—think four-legged chair on an uneven floor.

Comes with

  • DigiPlate Pro
  • DigiShade Pro
  • DigiMousePad
  • DigiLegs
  • DigiBase (Baby-Pin Mount)
  • Accessory Clamps (1-1.5" Base)