Kupo 40" Chrome Hex Grip Arm with Big Handle

40.75
  • Filmtools #: 23870
  • Mfr #: KG203711
In Stock
Not Eligible For Free Shipping
Product Features
  • Silver machined finish
  • 2-1/2" grip head mounted on the end of a 40" piece of steel tubing
  • 5/8" in diameter
  • Ergonomic T-handle
  • Baby hex-pin with 6 milled flat surface

Availability: In stock

You Pay: $40.75
Have a Question?

Call us at 1.888.807.1900

  • Overview

    The surface of the tubing is machined to create a rough texture to ensure a non-slippery surface. The 2-1/2" grip head consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver. The discs have 4 different sized V-shaped jaws to accept any accessory with a 5/8, 1/2, 3/8, or 1/4" mounting stud or tubing.

    The V-shaped jaws feature teeth that securely grab whatever is mounted between the plates securely. The 2-1/2" grip head features an oversized ergonomic T-handle and dedicated roller bearings designed for maximum torque. At the end of the 40" grip arm, you will find a baby hex-pin with 6 milled flat surfaces.

    You can mount your light fixtures or accessories on the end of your grip arm like a mini boom. They won't rotate due to the set-screw of that fixture or accessory, locking onto one of the sides of the hex-pin. The grip head uses a non-slip aluminum friction disc that maintains its durability over time, offering the user positive locking strength and precise control. The grip head is constructed around a solid steel central bolt with a fixed solid pin to secure it to the aluminum casting for increased strength and durability.

  • Specs
    Material Primary: Aluminum
    Secondary: Steel bar
    Diameter Jaw:
    Minimum: 0.25" (6.35 mm) Maximum: 0.62" (16.00 mm)
    Dimensions (L x H x W) 42.8 x 2.5 x 6.2" (108.6 x 6.4 x 15.7 cm)
    Weight 3.0 lb (1.4 kg)

The surface of the tubing is machined to create a rough texture to ensure a non-slippery surface. The 2-1/2" grip head consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver. The discs have 4 different sized V-shaped jaws to accept any accessory with a 5/8, 1/2, 3/8, or 1/4" mounting stud or tubing.

The V-shaped jaws feature teeth that securely grab whatever is mounted between the plates securely. The 2-1/2" grip head features an oversized ergonomic T-handle and dedicated roller bearings designed for maximum torque. At the end of the 40" grip arm, you will find a baby hex-pin with 6 milled flat surfaces.

You can mount your light fixtures or accessories on the end of your grip arm like a mini boom. They won't rotate due to the set-screw of that fixture or accessory, locking onto one of the sides of the hex-pin. The grip head uses a non-slip aluminum friction disc that maintains its durability over time, offering the user positive locking strength and precise control. The grip head is constructed around a solid steel central bolt with a fixed solid pin to secure it to the aluminum casting for increased strength and durability.