-
- Filmtools #: 11534
- Mfr #: 290637500000
- Extend your reach by 10ft
- Coaxial cable will connect to your Litepads coaxial plugs
-
- Filmtools #: 11330
- Mfr #: 900-0003
- Replace the power cord included with the 1x1
- Consists of just the AC power cord
-
- Filmtools #: 6936
- Mfr #: 900-1014
- 12 volt Cigarette Lighter Adapter from Litepanels
-
- Filmtools #: 6937
- Mfr #: 900-1015
- 12 volt 10ft. Jumper from Litepanels
-
- Filmtools #: 6939
- Mfr #: 900-1017
- 12volt 3ft. Jumper from Litepanels
-
- Filmtools #: 6940
- Mfr #: 900-1018
- 12volt 2inch Jumper from Litepanels
- Used to connect a Litepanel to a mounted Litepanel Battery
-
- Filmtools #: 11359
- Mfr #: 900-3016
- Replaces the D-Tap Cable that connects Litepanel adapter plates to the 1X1 unit.
-
Regular Price:
$200.00
Instant Savings:
$30.00
You Pay:
$170.00
+ Wishlist
+ Compare
- Filmtools #: 6402
- Mfr #: BAL-139X
- Flicker-free remote, high output ballast
- Runs on 12V DC and powers 9 or 12 inch fluorescent lamps in a Mini-Flo fixture
- Gives the most rigging flexibility when the Mini-Flo fixtures are to be placed far apart
- Comes with a 4-pin xlr connector
-
Regular Price:
$395.00
Instant Savings:
$59.25
You Pay:
$335.75
+ Wishlist
+ Compare
- Filmtools #: 11887
- Mfr #: BAL-149X
- 2vdc dimming ballast that can operate DC or AC
- Connects to 12vdc power cable (4-pin xlr) or 24vdc cable (3-pin xlr)
- Connects to lamp harness cable
- Adjusts light level of the lamp and bottom end of the dimming curve
-
Regular Price:
$675.00
Instant Savings:
$101.25
You Pay:
$573.75
+ Wishlist
+ Compare
- Filmtools #: 8189
- Mfr #: BAL-427-120U
- Can operate the fixture heads from up to 75 feet (3 x 25ft) extension cables
- High output, high frequency electronic ballast that can operate four lamps
- Sends a high output current to the lamps to drive the light as brightly as possible
- Special heat-sink design
- Uses 1/10th as much power to produce the same amount of soft light as incandescents.
Standard Shipping
