RED Redlink Development Kit

395
  • Filmtools #: 54381
  • Mfr #: 720-0028
Availability
Product Features
  • Machined aircraft-grade aluminum
  • Pack includes DSMC® Modular Assault Plate and Plate 15mm Adaptor
  • DSMC® Modular Assault Plate bolts directly to the bottom of the EPIC or SCARLET-X
  • The Lightweight 15mm Adaptor is ideal for use with a follow focus, matte box, etc
  • The DSMC Modular Assault Plate is not recommended for studio offset systems.

Availability: In stock

You Pay: $395.00
Have a Question?

Call us at 1.888.807.1900

  • Overview

    The RED Redlink Development Kit is a developmental kit that allows programmers to create custom apps ton control DSMC modules from a mobile device, computer or even a microcontroller. The kit comes with a USB that is loaded with Redlink SDK sample apps along with any other additional resources for you to work with.

    Use the SDK, apps, and resources to create custom applications that allow you to adjust controls on the DSMC, including Record Start/Stop, Shutter Speed, White Balance, ISO, and programmable User Keys. You can also program your custom app to monitor the status of your camera settings.

    Completing the REDLINK Development Kit is the REDLINK Bridge, a wireless module that allows apps to communicate with the DSMC through the REDLINK Command Protocol (RCP). Additionally, the REDLINK Bridge interfaces with the RED 3-Axis Lens Control System’s T.H.C. (Tactical Hand Controller) to control focus and iris on Canon and Nikon lenses. The REDLINK Bridge attaches to the rear of the DSMC BRAIN or compatible rear module, and supports a wireless communication range of approximately 50 ft.

    Note: The REDLINK Bridge requires that the DSMC is on firmware v5.2.8 or later.

  • Specs
    Wireless Standard 802.11/b/g/n
    Wireless Range Approximately 50 feet
    Data Rates 1 Mbps to 72 Mbps
    Network Modes     Ad-Hoc mode
    Infrastructure mode
    Network Security WEP
    Network Channels Channel 1 to Channel 11 (when connecting to a device)
    Channel 1 to Channel 42 (when connecting to T.H.C.)
    Output Connector 1x 0B 6-pin LEMO auxiliary connector
    Dimensions Height (w/ antenna): 5.17" (13.1 cm)
    Height (w/o antenna): 4.32" (11 cm)
    Width: 2.95" (7.5 cm)
    Depth: 1.06" (2.7 cm)
    Weight 0.477 lbs (216 g)
    Material Aluminum
    Construction Machined
    Coating Black anodized coating
    Operating Temperature 0°C to 40°C (32°F to 104°F)
    Storage Temperature –20°C to 50°C (–4°F to 122°F)
    Operating Humidity Range 0% to 85%, non-condensing
    Storage Humidity Range 0% to 85%, non-condensing
    Typical Operating Power Dissipation 220 mA
    Peak Operating Power Dissipation 300 mA

The RED Redlink Development Kit is a developmental kit that allows programmers to create custom apps ton control DSMC modules from a mobile device, computer or even a microcontroller. The kit comes with a USB that is loaded with Redlink SDK sample apps along with any other additional resources for you to work with.

Use the SDK, apps, and resources to create custom applications that allow you to adjust controls on the DSMC, including Record Start/Stop, Shutter Speed, White Balance, ISO, and programmable User Keys. You can also program your custom app to monitor the status of your camera settings.

Completing the REDLINK Development Kit is the REDLINK Bridge, a wireless module that allows apps to communicate with the DSMC through the REDLINK Command Protocol (RCP). Additionally, the REDLINK Bridge interfaces with the RED 3-Axis Lens Control System’s T.H.C. (Tactical Hand Controller) to control focus and iris on Canon and Nikon lenses. The REDLINK Bridge attaches to the rear of the DSMC BRAIN or compatible rear module, and supports a wireless communication range of approximately 50 ft.

Note: The REDLINK Bridge requires that the DSMC is on firmware v5.2.8 or later.