RED Start/Stop Cable - 1B To Sync/Ctrl/BNC

275
  • Filmtools #: 54702
  • Mfr #: 790-0415
Availability
Product Features
  • Connects 1B to Sync, Ctrl, BNC
  • Provides start/stop and tally support

Availability: In stock

You Pay: $275.00
Have a Question?

Call us at 1.888.807.1900

  • Overview

    The RED Start/Stop Cable is a cable that allows you to connect from a 1B to Sync, Ctrl, BNC. It provides start/stop and tally support through the RED W.M.D. (WIRELESS MOTOR DRIVER).

    The 14-pin 1B LEMO connects to the EXP port on the W.M.D, and transfers the tally signal from the BRAIN to the W.M.D. The 4-pin LEMO connects to the CTRL port on the BRAIN.

    The BNC connector connects to the SYNC port on the BRAIN via a 3BNC-TO-00 SYNC CABLE and a BNC-TO-BNC Adaptor, and transfers the start/stop signal to the BRAIN.

    NOTE: Full support for start/stop requires the 3BNC-TO-00 SYNC CABLE and a BNC-TO-BNC ADAPTOR (included with the RED 3-Axis Lens Control System). The 3BNC-TO-00 SYNC CABLE has two additional BNC connectors that offer support for timecode and genlock.

The RED Start/Stop Cable is a cable that allows you to connect from a 1B to Sync, Ctrl, BNC. It provides start/stop and tally support through the RED W.M.D. (WIRELESS MOTOR DRIVER).

The 14-pin 1B LEMO connects to the EXP port on the W.M.D, and transfers the tally signal from the BRAIN to the W.M.D. The 4-pin LEMO connects to the CTRL port on the BRAIN.

The BNC connector connects to the SYNC port on the BRAIN via a 3BNC-TO-00 SYNC CABLE and a BNC-TO-BNC Adaptor, and transfers the start/stop signal to the BRAIN.

NOTE: Full support for start/stop requires the 3BNC-TO-00 SYNC CABLE and a BNC-TO-BNC ADAPTOR (included with the RED 3-Axis Lens Control System). The 3BNC-TO-00 SYNC CABLE has two additional BNC connectors that offer support for timecode and genlock.