1-1/4" Speed Rail T6 Aluminum (4' - 20')

21
  • Filmtools #: 22229-etc
  • Mfr #: ALP125
Availability
Freight Shipping
Product Features
  • 1-1/4" Speed Rail T6 Aluminum Schedule 40
  • Choice of 5 ft, 10ft, 15 ft, 20ft
  • 1 ¼” interior diameter

Availability: In stock

You Pay: $21.00
Have a Question?

Call us at 1.888.807.1900

  • Overview

    This is a single piece of 1-1/4" Speed Rail made of 6061-T6 Aluminum. Your choice of between a variety of sizes ranging as low as 4' to 20' sections. This is schedule 40 aluminum tubing, very common on movie sets because it has so many uses. Filmtools stocks a variety of fittings and accessories for this size of Speed Rail (see below). This size speed rail can also be used as track with some dollies such as the Dana Dolly.

    The Speed Rails have an interior diameter of 1 ¼”.
    Please Note: When buying speed rail for the Dana Dolly, two sections of (approximately equal length) speed-rail are required.

  • FAQ
    How long do I need for a slider set up?
    As long as you think you'll need! If you want a longer slider set up, you'll need longer rail. Just remember that you'll need to purchase two, unless you plan on cutting them yourself.

    What does "Schedule 40" mean?
    The "Schedule" refers to the thickness of the wall on the pipe. Schedule 40 on 1 1/4" pipe has a wall thickness of 0.140"

This is a single piece of 1-1/4" Speed Rail made of 6061-T6 Aluminum. Your choice of between a variety of sizes ranging as low as 4' to 20' sections. This is schedule 40 aluminum tubing, very common on movie sets because it has so many uses. Filmtools stocks a variety of fittings and accessories for this size of Speed Rail (see below). This size speed rail can also be used as track with some dollies such as the Dana Dolly.

The Speed Rails have an interior diameter of 1 ¼”.
Please Note: When buying speed rail for the Dana Dolly, two sections of (approximately equal length) speed-rail are required.