AJA 2-Channel 3G-SDI to Single-Mode LC Fiber Transmitter

The AJA 2-Channel 3G-SDI to Single-Mode LC Fiber Transmitter handles two independent, matched LC fibre outputs over single-mode fibre so you can send your video via lay fibre or a fibre-based communications system. Installs into an OG-X-FR, OG-3-FR, or DFR-8321 openGear frame, allowing for monoitored cables for fiber fibre (FC), or 3G-SDI. All setups include input 3G-SDI, 2khz Word Clock, Reference Input, RS-422 Control involved in the frame sync function. The AJA 2-Channel 3G-SDI to Single-Mode LC Fiber Transmitter has two 3G-SDI input BNC and 2 LC optical fibre output ports. The card installed in an OG-X-FR, OG-3-FR, or DFR-8321 openGear frame and has an openGear DashBoard software monitor for macOS, Windows, or Linux.

The card supports format-agnostic video at bandwidth speeds from 150 Mb/s to 3 Gb/s. Its features include automatic detection, re-clocking, pass-through, input/SMPTE lock LEDs, and a 1310 nm wavelength. The card takes up two slots in the openGear frame, consumes 2.5W of power, and it is hot-swap capable.

Key Features

• 150 Mb/s to 3 Gb/s bandwidth throughput, format agnostic

• Two independent 3G-SDI BNC inputs

• Two independent single-mode optical fiber outputs with LC connectors

• Input Present and Input SMPTE Lock LEDs

• Automatic detection and re-clocking

• Re-clocking 270 Mb/s, 1.483 Gb/s, 1.485 Gb/s, 2.966 Gb/s, 2.970 Gb/s bandwidth settings, Auto Select setting

• All other rates are passed through and not reclocked

• 1310 nm wavelength

• -5 dBm minimum, 0 dBm maximum optical power

• 2.5W power consumption

• Hot-swap capable

Compatibility

• OG-X-FR, OG-3-FR and DFR-8321 openGear frames

• openGear DashBoard software for macOS, Windows, and Linux