ARRI ALEXA 35 Lightweight Expansion Set

Mount accessories such as top handles and extensions onto the top of your ALEXA 35 cinema camera with this ARRI Universal Adapter Plate UAP-3. The flat, low-profile plate mounts on top of the camera, and it provides attachment points for accessories such as the optional Lightweight Camera Handle LCH-1 and Center Camera Handle CCH-2. You can add more accessories by mounting the optional Top Extension Bracket TEB-1. The plate can also be mounted onto the bottom of the camera for additional mounting options.

Easily and safely carry your ALEXA 35 cinema camera with the ARRI Lightweight Camera Handle LCH-1. The lightweight carbon fiber handle mounts onto the top of the camera using the Universal Adapter Plate UAP-3, and it requires no installation tools. The handle slides back and forth through the post to provide balance adjustment.

Compatibility

• ARRI ALEXA 35 cinema camera
• ARRI Universal Adapter Plate UAP-3
• ARRI Balance Harness Adapter BHA-1
• ARRI Lightweight Support LWS-6
• ARRI Balance Harness Adapter BHA-1

The ARRI Balance Harness Adapter BHA-1 mounts onto the Lightweight Camera Handle LCH-1 for the ALEXA 35 cinema camera and provides quick camera balancing when using a suspension harness. It slides back and forth over the handle, allowing for easy balancing, and it secures using a thumbscrew. There is also one 3/8"-16 thread available on the adapter for mounting an accessory.

Compatibility

• ARRI ALEXA 35 cinema camera
• ARRI Lightweight Camera Handle LCH-1
• ARRI Lightweight Support LWS-6

The ARRI Lightweight Support LWS-6 enables you to add two optically centered standard 15mm LWS rods and accessories to your camera rig. It can be used with the LCH-1 lightweight camera handle and/or the UAP-3 universal adapter plate to mount a variety of accessories such as a focus motor, matte box, or the MVB-1 viewfinder bracket.

Compatibility

• Standard 15mm LWS rods and 15mm LWS compatible accessories
• ARRI LCH-1 Lightweight Camera Handle
• ARRI UAP-3 Universal Adapter Plate
• ARRI MVB-1 Viewfinder Bracket
• ARRI Bridge Plate Adapter BPA-6

Use this ARRI Bridge Plate Adapter BPA-6 as a support for your small and lightweight cinema camera, such as the ALEXA 35, to support an ARRI studio bridge plate or dovetail interface on the BUD-1. This compact plate features an optically centered 15mm LWS rod block and a small shoulder pad, which allow you to quickly balance, mount, and unmount the camera for different rig setups. It also features a "Touch and Go 35" snap-plate compatible with ARRI bridge plates such as the BP-8 and BP-9.

Compatibility

• Small-to-medium, lightweight cinema cameras such as the ARRI ALEXA 35
• Standard 15mm rods
• ARRI BUD-1 dovetail
• ARRI Bridge Plates BP-8 and BP-9
• ARRI Compact Shoulder Pad CSP-2

Use the Rod Mounting Bracket (RMB-3) from ARRI to support a single, standard 19mm rod for mounting a lens motor, lightweight EVF bracket, etc. to your camera or cage rig. When used with a separately available insert, the RMB-3 can be used to support a 15mm rod. A mounted rod is easily secured using the thumb lever on this screw-in bracket.

Rod Compatibility

• 19mm
• 15mm (with separately available insert K2.66255.0)
• ARRI Viewfinder Cross Pipe

The ARRI Viewfinder Cross Pipe is compatible with the MVB-1 viewfinder mounting bracket. Use it with ARRI EVF brackets to attach an ARRI or third-party viewfinder.