ARRI ALEXA Mini LF Ready to Shoot Set V

Built around a large-format 4K version of the original ALEXA sensor, the ARRI ALEXA Mini LF Ready to Shoot Set offers native 4K recording in three sensor modes, with ARRIRAW or ProRes recording in LF Open Gate, LF 16:9, or LF 2.39:1 mode. The ALEXA Mini LF combines large-format resolution with an optimal pixel size for excellent image quality producing vivid, nuanced images with natural skin tones and smooth bokeh. The ALEXA Mini LF is designed with ARRI's LPL lens mount that has been optimized for large-format capture and is compatible with all PL-mount lenses with the use of a PL-to-LPL adapter. A wider diameter and shorter flange focal depth than the original ARRI PL mount enable LPL-mount lenses to be smaller and lighter than earlier large-format optics.

The ALEXA Mini LF is a hybrid of the ALEXA Mini and the ALEXA LF, as it retains the same LF sensor but has the form factor of the Mini. The new exterior has a left-side media bay with two rows of connectors on the back and a slot to insert 1TB Codex media. It also features six user buttons, three more than the Mini, to configure to your preference. It also features extra 12 and 24V power outputs and a black burst/tri-level input. The audio connector is now 6-pin, so it doesn't conflict with the 5-pin timecode port.

This ARRI ALEXA Mini LF Ready to Shoot Se includes everything you need to get up and shooting with the ALEXA Mini LF such as the PL-to-LPL adapter, two 1TB Codex drives, a viewfinder, side and rear brackets, accessory and bridge plates, a V-mount battery power splitter box, and connection cables. Read more about the included items below.

ARRI LPL Mount (LBUS)

The LBUS ARRI LPL Lens Mount enables you to attach an LPL-mount lens to select ARRI cameras. This mount is compatible with ALEXA 35, ALEXA Mini LF, ALEXA Mini, and AMIRA cameras, but please note that the LBUS connector is not supported on the AMIRA. The interior is designed to reduce reflections, ensuring that your image's full contrast range is transmitted to the sensor.

Compatible ARRI Cameras

• ALEXA 35
• ALEXA Mini
• ALEXA Mini LF
• AMIRA

ARRI PL-to-LPL Lens Adapter

The ARRI PL-to-LPL Lens Adapter enables you to attach a PL-mount lens to an ARRI ALEXA 35, ALEXA LF, or ALEXA Mini LF camera with an LPL mount. Compatible with any PL-mount lens and with ARRI LDS-1 and Cooke /i lens data, this adapter reduces internal reflections, ensuring a full contrast range.

Camera Compatibility

• ARRI
• ALEXA 35
• ALEXA LF
• ALEXA Mini LF

ARRI MVB-1 Viewfinder Mounting Bracket for ALEXA Mini

Use the ARRI MVB-1 Viewfinder Mounting Bracket to mount the MVF-1 electronic viewfinder to an ALEXA Mini camera. This bracket provides adjustable positioning of the EVF via 15mm LWS rods and the viewfinder mount. The separately available MAP-2 adapter plate is required for 15mm rod support on the ALEXA Mini.

Compatible Cameras

• ALEXA Mini
• ARRI CCH-2 Center Camera Handle

Expand your options for mounting HD camera accessories like monitors, transmitters, mic holders, French flags, etc., on your ARRI camera rig by using the ARRI CCH-2 Center Camera Handle. This sturdy carrying handle screws onto a UAP-2 adapter plate (available separately), and features multiple 3/8"-16 and 1/4"-20 threaded holes for attaching accessories. Designed for use with ALEXA M, ALEXA Mini, and AMIRA cameras, it will also work with many ARRI accessory-equipped third-party cameras.

Features

• Sturdy carrying handle attaches to a UAP-2 adapter plate (available separately) to provide accessory mounts
• Adds multiple 3/8"-16 threaded mounting points to an AMIRA and ALEXA M/Mini Camera, or third-party cameras using ARRI support systems

ARRI Mini Side Bracket MSB-2

The Mini Side Bracket MSB-2 from ARRI is a cage-style component compatible with the ALEXA Mini and the right side of the ALEXA Mini LF. This bracket's single rod holder enables lens motor support for lightweight handheld or drone rigs lacking a baseplate rod bracket. The MSB-2 bracket offers native 19mm rod support and 15mm rod support using a separately available bushing.

The MSB-2 bracket incorporates several 1/4"-20 and anti-twist 3/8"-16 threads for mounting accessories. An integrated rosette enables the mounting of a separately available handgrip or handle.

Compatibility

• ALEXA Mini and ALEXA Mini LF right side

Features

• Single rod support enables lightweight lens motor support for rigs lacking a baseplate rod bracket
• Native 19mm rod support or 15mm rod support with separately available bushing
• Adds 1/4"-20 and anti-twist 3/8"-16 accessory mounting points
• Integrated rosette for mounting a handgrip or handle
• Use alone or as an ARRI ALEXA Mini LF/ ALEXA Mini cage component

ARRI Compact Bridge Plate CBP-1 19mm for ALEXA Mini/Mini LF

The ARRI Compact Bridge Plate CBP-1 19mm provides a lightweight option for mounting 19mm Studio-standard accessories to your ALEXA Mini or Mini LF camera. A sliding balance mechanism and quick release system offer the adjustability of a studio bridge plate at a reduced weight. Features include right and left rosettes, front 19mm Studio rod support, and a built-in, contoured shoulder pad. Use the CBP-1 19mm bridge plate to mount camera accessories onto a pair of separately available rods or the ARRI-standard rosettes.

Quick Mounting/Detaching

• A quick release system enables you to mount or detach the camera without sliding out the balance assembly.
• Provides a quick transition to a stabilizer's dovetail.

Optional Rod Brackets

• Add 19mm Studio rod-mounted accessories in front of your ARRI ALEXA Mini.
• Attach single or dual rod brackets as needed to save weight on your rig.

Dual Rosettes

Rosettes on both right and left sides for attaching a handgrip or other rosette-based accessory.

Contoured Shoulder Pad

Integrated, contoured shoulder pad increases comfort while operating handheld.

ARRI Rear Accessory Bracket RAB-1

The ARRI Rear Accessory Bracket RAB-1 is designed to mount accessories like battery plates or power-splitting boxes to the ALEXA Mini camera body. This curved bracket screws onto the camera providing a rib-like structure on which to attach a power solution. Use the RAB-1 bracket with the separately available RAB-1 Clamp to attach an ARRI Power Splitting Box, or a BAP-1 Battery Adapter Plate.

ARRI Rod Mounting Bracket (RMB-3)

Use the Rod Mounting Bracket (RMB-3) from ARRI to support a single, standard 19mm rod for mounting a lens motor, lightweight EVF bracket, etc. to your camera or cage rig. When used with a separately available insert, the RMB-3 can be used to support a 15mm rod. A mounted rod is easily secured using the thumb lever on this screw-in bracket.

Rod Compatibility

• 19mm
• 15mm (with separately available insert K2.66255.0)

ARRI 15mm Reduction Insert for 19mm Rod

The ARRI 15mm Reduction Insert is used to adapt a 19mm rod bracket to accept standard 15mm rods. This insert works with any 19mm rod mount.

ARRI V-Mount Power Splitting Box Mk II

Power and add multiple accessory ports to your camera rig using a V-mount battery and the Power Splitting Box Mk II from ARRI. This plate has a variety of accessory output ports and incorporates a 15mm LWS rod bracket. Compatible with ALEXA Mini and Mini LF cameras, this splitter plate has an 8-pin LEMO port for linking to a block battery or using an ARRI KC-50 cable.

Compatibility

• ARRI ALEXA Mini and Mini LF cameras
• V-mount batteries
• 15mm LWS rod system

ARRI ALEXA Mini/AMIRA Straight Power Cable KC-50 (6.6')

Use the ALEXA Mini/AMIRA Straight Power Cable from ARRI to connect the camera to a battery with a 3-pin XLR connector.