ARRI Broadcast Set for ALEXA Mini V-Mount

The ARRI Broadcast Set for ALEXA Mini V-Mount is based around the Broadcast Plate—an adjustable baseplate with an integrated shoulder pad, 15mm LWS rod support, and VCT-style plate compatibility. The components in this bundle enable you to quickly transition between handheld and tripod-based shots. Items include two handgrips with extensions, an MVB-1 viewfinder bracket, various accessory mounting brackets, a center handle with an extension block, a stabilizer plate, and both power and Ethernet cables. A right-angle adapter converts the EXT port to a 3-pin LEMO RS connector.

An adapter plate provides two 2-pin LEMO output ports, enabling you to switch between V-mount and block battery input to power the ALEXA Mini. A rear battery adapter plate, MAP-2 adapter plate, and a pair of 13.4" 15mm rods round out the Broadcast Set.

ARRI Broadcast Plate ALEXA Mini

Designed for documentary-style capture, the ARRI Broadcast Plate ALEXA Mini enables you to quickly switch between shoulder-mounted, and tripod-based shots with your ARRI ALEXA Mini camera. This versatile plate is compatible with VCT-style plates like the ARRI QRP-1 for quick and easy mounting to a head, while also incorporating a shoulder mount for handheld use.

The Broadcast Plate ALEXA Mini has front and rear holders for lightweight 15mm rods (not included), enabling you to flesh out your camera rig with rod-mounted accessories. Balance adjustments can easily be made to the plate without disrupting the placement of any rod-mounted accessory.

Rosettes on both the right and left sides of the Broadcast Plate ALEXA Mini provide points for attaching handgrips, and the contoured shoulder pad makes for more comfortable handheld operating.

Features

• Dual VCT-style plate/handheld mounting options
• Easily adjust your rig's balance without affecting the placement of any rod-mounted accessory
• Enables the addition of 15mm rod-mounted accessories to your ALEXA Mini
• Rosettes on both right and left sides for attaching a handgrip or other rosette-based accessory
• Contoured shoulder pad increases comfort when in handheld mode

ARRI MAP-2 Adapter Plate for ALEXA Mini (15mm)

The MAP-2 Adapter Plate for ALEXA Mini from ARRI supports a pair of 15mm LWS rods, and mounts to the bottom or top of the camera. Use this adapter to flesh out your ALEXA Mini rig with rod-mounted accessories. The MAP-2 adapter plate is compatible with studio bridgeplates when used with the separately available BPA-4 adapter. Tape measure studs on both sides of the plate aid in measuring precise focus distances.

ARRI MSB-1 Side Bracket for ALEXA Mini

The ARRI MSB-1 Side Bracket helps to cradle and protect the ALEXA Mini camera body, providing 3/8"-16 and 1/4"-20 threads for mounting accessories. An integrated rosette enables the mounting of a separately available handgrip or handle. Use this bracket alone, or as a modular part of the ARRI ALEXA Mini cage.

Features

• Adds 3/8"-16 and 1/4"-20 accessory mounting points
• Integrated rosette for mounting a handgrip or handle
• Use alone, or as an ARRI ALEXA Mini cage component

ARRI SAB-1 Side Accessory Bracket for ALEXA Mini

The ARRI SAB-1 Side Accessory Bracket fits onto an ALEXA Mini adapter plate, providing multiple points for attaching accessories to the camera (adapter plate available separately). In addition to 3/8"-16 and 1/4"-20 threaded holes, the SAB-1 provides interfaces for attaching the RMB-3 Rod Mounting bracket and MSB-1 Mini Side Brackets. The SAB-1 Bracket can be mounted to an MAP-1 or MAP-2 ALEXA Mini Adapter Plate, the Mini Broadcast Plate, or the CBP-1 Compact Bridgeplate.

Features

• Attaches to the ARRI ALEXA Mini via an adapter plate (available separately)
• Provides multiple 3/8"-16 and 1/4"-20 accessory mounting points
• Can be used to mount the RMB-3 Rod Mounting Bracket and MSB-1 ALEXA Mini Side Brackets
• Attaches to an MAP-1 or MAP-2 ALEXA Mini Adapter Plate, the Mini Broadcast Plate, or the CBP-1 Compact Bridgeplate (all available separately)

ARRI MVB-1 Viewfinder Mounting Bracket for ALEXA Mini

Use the ARRI MVB-1 Viewfinder Mounting Bracket to mount the MVF-1 electronic viewfinder to an ALEXA Mini camera. This bracket provides adjustable positioning of the EVF via 15mm LWS rods and the viewfinder mount. The separately available MAP-2 adapter plate is required for 15mm rod support on the ALEXA Mini.

Compatible Cameras

• ALEXA Mini

ARRI CCH-2 Center Camera Handle

Expand your options for mounting HD camera accessories like monitors, transmitters, mic holders, French flags, etc., on your ARRI camera rig by using the ARRI CCH-2 Center Camera Handle. This sturdy carrying handle screws onto a UAP-2 adapter plate (available separately), and features multiple 3/8"-16 and 1/4"-20 threaded holes for attaching accessories. Designed for use with ALEXA M, ALEXA Mini, and AMIRA cameras, it will also work with many ARRI accessory-equipped third-party cameras.

Features

• Sturdy carrying handle attaches to a UAP-2 adapter plate (available separately) to provide accessory mounts
• Adds multiple 3/8"-16 threaded mounting points to an AMIRA and ALEXA M/Mini Camera, or third-party cameras using ARRI support systems

ARRI Handle Extension Block (HEB-1)

Attach the ARRI Handle Extension Block (HEB-1) to the CCH-1 Center Camera Handle to add length, and three 3/8"-16 threaded mounts to the carrying handle. This extension may also be screwed to any standard UNC 3/8"-16 threaded mount, and can be used with both ARRI and third-party cage rigs.

ARRI 15mm Lightweight Support Rods (Pair, 13")

This pair of 13" ARRI Lightweight Support Rods feature lightweight stainless steel construction and are designed to reduce your rig's weight. Use them with any 15mm-based accessory or bridgeplate.

• Hollow, lightweight stainless steel construction with non-threaded ends
• Compatible with any 15mm-based accessory or bridgeplate

ARRI Handgrip with On/Off Switch RS 3-Pin

The ARRI Handgrip with On/Off Switch RS 3-Pin features a run/stop button function for triggering your ARRI ALEXA or AMIRA camera. Use this grip to easily start/stop your camera with one hand; no need to hunt for a button with your left hand while balancing the camera on your right shoulder. The handgrip is also compatible with select third-party cameras with 3-pin run/stop connectors.

Designed with a contoured rubber grip and a standard ARRI rosette connection, this ARRI handgrip can be rotated 360° and fastens via its integrated thumb-lever.

• Run/stop trigger for ARRI ALEXA, AMIRA, and select 3rd-part cameras
• Standard 360° ARRI rosette connector
• Contoured rubber handle for a comfortable grip
• Thumb-lever fastener

ARRI Handgrip without On/Off Switch

The ARRI Handgrip features a contoured rubber grip and a standard ARRI rosette connection. Designed for physical camera support only, this handgrip does not include an electronic on/off switch. The handgrip can be rotated 360°, and fastens via its integrated thumb-lever.

• Standard 360° ARRI rosette connector
• Contoured rubber handle for a comfortable grip
• Thumb-lever fastener

ARRI Handgrip Extension (9.4")

The black, 9.4" tubular ARRI Handgrip Extension fits between an ARRI Master Grip or handgrip, and your camera or rig base. Use the extension to position the grip comfortably based on your rig configuration. This rosette-based extension is constructed from stainless steel, and is the longest length of three available versions.

The Handgrip Extension's notched rosette design ensures a stable fit, fastening with an integrated, winged screw.

Features

• Compatible with ARRI standard rosettes
• Extends handgrip 9.4"
• Constructed of stainless steel

ARRI ALEXA Mini/AMIRA Straight Power Cable KC-50 (6.6')

Use the ALEXA Mini/AMIRA Straight Power Cable from ARRI to connect the camera to a battery with a 3-pin XLR connector.

ARRI ALEXA Ethernet/RJ45 Cable (KC 153-S, 9.8')

The ARRI ALEXA Ethernet/RJ45 Cable (KC 153-S, 9.8') is designed with a 10-pin LEMO connector on one end, and an RJ45 connector on the other. Use this cable to link your ALEXA to the Ethernet for updates, camera remote control, or service functions.

ARRI EXT-RS Adapter ALEXA Mini/Mini LF

Use the ARRI EXT-RS Adapter to convert an ALEXA Mini or Mini LF's external sync port into a 3-pin RS connection. This short right-angle to straight adapter cable can be used with a compatible accessory to provide RUN/STOP capability.

ARRI BAP-1 Battery Adapter Plate

The BAP-1 Battery Adapter Plate from ARRI is designed to use a V-Lock, Gold Mount, or other standard battery mount on a pair of 15mm rods. This ALEXA Mini accessory has pre-drilled holes for attaching the battery mount (not included) to the plate. The battery plate may be offset from the rod clamp to accommodate a camera's rear card slot or to help balance the camera rig. The BAP-1 has a semicircular clamp design that enables you to snap the plate onto the rods without necessitating the removal of other rod-mounted accessories.

Compatible Battery Mounts

Including, but not limited to, V-Lock, Gold Mount, etc.

Rod Clamp

Open design enables you to clamp the plate onto a pair of rods without having to remove other rod-mounted accessories

ARRI Stabilizer Plate for CBP

The ARRI Stabilizer Plate for CBP enables the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for the ALEXA Mini (SAM-2). Compatible with third-party, standard 60mm dovetails, this plate serves as the bottom half of a camera-balancing bridge plate system.

ARRI V-Mount Adapter Plate Mk II for ALEXA Mini

The versatile V-Mount Adapter Plate Mk II for ALEXA Mini from ARRI offers two means of powering the ALEXA Mini camera. Connect a V-mount battery, or plug a cable from a block battery into the plate's 8-pin LEMO port. This ALEXA Mini accessory has pre-drilled holes for attaching the adapter to a battery plate (available separately).

Two 2-pin LEMO ports on the adapter output 13V regulated power for accessories. The V-Mount Adapter Plate Mk II features a sturdy aluminum build.