ARRI Studio 19mm Set ALEXA Mini Gold Mount

The ARRI Studio 19mm Set ALEXA Mini Gold Mount provides a comprehensive selection of 19mm rod-based accessory components. Items in the bundle include a bridge plate and dovetail, various accessory mounting brackets, a center handle with an extension block, an EXT to 3-pin LEMO RS adapter, and both power and Ethernet cables. A power distribution box enables the use of long-lasting Gold mount block batteries. Use these accessories to configure your ALEXA Mini for various setups such as handheld, gimbal, and stabilizer use.

Two MAP-2 adapter plates, two RMB-3 rod-mounting brackets, and two 19mm rods of different lengths enable you to save time by leaving your ALEXA Mini and its accessories ready for either top- or bottom-mounting. A pair of 15mm bushings are included for using the set components with your own 15mm LWS rods (available separately).

ARRI Gold Mount Power Splitting Box Mk II

Power and add multiple accessory ports to your camera rig using a Gold mount battery and the Power Splitting Box Mk II from ARRI. This plate has a variety of accessory output ports and incorporates a 15mm LWS rod bracket. Compatible with ALEXA Mini and Mini LF cameras, this splitter plate has an 8-pin LEMO port for linking to a block battery or using an ARRI KC-50 cable.

Compatibility

• ARRI ALEXA Mini and Mini LF cameras
• Gold mount batteries
• 15mm LWS rod system

ARRI MAP-2 Adapter Plate for ALEXA Mini (15mm)

The MAP-2 Adapter Plate for ALEXA Mini from ARRI supports a pair of 15mm LWS rods, and mounts to the bottom or top of the camera. Use this adapter to flesh out your ALEXA Mini rig with rod-mounted accessories. The MAP-2 adapter plate is compatible with studio bridgeplates when used with the separately available BPA-4 adapter. Tape measure studs on both sides of the plate aid in measuring precise focus distances.

ARRI MSB-1 Side Bracket for ALEXA Mini

The ARRI MSB-1 Side Bracket helps to cradle and protect the ALEXA Mini camera body, providing 3/8"-16 and 1/4"-20 threads for mounting accessories. An integrated rosette enables the mounting of a separately available handgrip or handle. Use this bracket alone, or as a modular part of the ARRI ALEXA Mini cage.

Features

• Adds 3/8"-16 and 1/4"-20 accessory mounting points
• Integrated rosette for mounting a handgrip or handle
• Use alone, or as an ARRI ALEXA Mini cage component

ARRI Mini Side Bracket MSB-2

The Mini Side Bracket MSB-2 from ARRI is a cage-style component compatible with the ALEXA Mini and the right side of the ALEXA Mini LF. This bracket's single rod holder enables lens motor support for lightweight handheld or drone rigs lacking a baseplate rod bracket. The MSB-2 bracket offers native 19mm rod support and 15mm rod support using a separately available bushing.

The MSB-2 bracket incorporates several 1/4"-20 and anti-twist 3/8"-16 threads for mounting accessories. An integrated rosette enables the mounting of a separately available handgrip or handle.

Compatibility

• ALEXA Mini and ALEXA Mini LF right side

Features

• Single rod support enables lightweight lens motor support for rigs lacking a baseplate rod bracket
• Native 19mm rod support or 15mm rod support with separately available bushing
• Adds 1/4"-20 and anti-twist 3/8"-16 accessory mounting points
• Integrated rosette for mounting a handgrip or handle
• Use alone or as an ARRI ALEXA Mini LF/ ALEXA Mini cage component

ARRI Compact Bridge Plate CBP-1 19mm for ALEXA Mini/Mini LF

The ARRI Compact Bridge Plate CBP-1 19mm provides a lightweight option for mounting 19mm Studio-standard accessories to your ALEXA Mini or Mini LF camera. A sliding balance mechanism and quick release system offer the adjustability of a studio bridge plate at a reduced weight. Features include right and left rosettes, front 19mm Studio rod support, and a built-in, contoured shoulder pad. Use the CBP-1 19mm bridge plate to mount camera accessories onto a pair of separately available rods or the ARRI-standard rosettes.

Quick Mounting/Detaching

• A quick release system enables you to mount or detach the camera without sliding out the balance assembly.
• Provides a quick transition to a stabilizer's dovetail.

Optional Rod Brackets

• Add 19mm Studio rod-mounted accessories in front of your ARRI ALEXA Mini.
• Attach single or dual rod brackets as needed to save weight on your rig.

Dual Rosettes

Rosettes on both right and left sides for attaching a handgrip or other rosette-based accessory.

Contoured Shoulder Pad

Integrated, contoured shoulder pad increases comfort while operating handheld.

ARRI Bottom Dovetail Plate (12")

This 12" Bottom Dovetail Plate from ARRI is used with a sliding bridge plate or sled to balance your camera rig. To prevent the bridge plate or sled from sliding off, the Dovetail Plate features a spring-loaded post on one end and a stationary stop on the other. The bottom of the plate incorporates 3/8"-16 threaded holes for mounting the dovetail to a tripod quick release plate or other support.

• Use with a sliding bridge plate or sled to balance your camera rig (plate or sled not included)
• Includes a spring-loaded post on one end, and a stationary stop on the other to prevent the bridge plate or sled from sliding off
• Bottom of dovetail includes 3/8"-16 threaded holes for mounting to a tripod quick release plate or other support

ARRI Rear Accessory Bracket RAB-1

The ARRI Rear Accessory Bracket RAB-1 is designed to mount accessories like battery plates or power-splitting boxes to the ALEXA Mini camera body. This curved bracket screws onto the camera providing a rib-like structure on which to attach a power solution. Use the RAB-1 bracket with the separately available RAB-1 Clamp to attach an ARRI Power Splitting Box, or a BAP-1 Battery Adapter Plate.

ARRI RAB-1 Clamp

The ARRI RAB-1 Clamp is used to mount an ARRI battery plate or power-splitting box to the separately available RAB-1 Rear Accessory Bracket for the ALEXA Mini camera body. This clamp features a slide-in design with a thumb-lever release.

ARRI SAB-1 Side Accessory Bracket for ALEXA Mini

The ARRI SAB-1 Side Accessory Bracket fits onto an ALEXA Mini adapter plate, providing multiple points for attaching accessories to the camera (adapter plate available separately). In addition to 3/8"-16 and 1/4"-20 threaded holes, the SAB-1 provides interfaces for attaching the RMB-3 Rod Mounting bracket and MSB-1 Mini Side Brackets. The SAB-1 Bracket can be mounted to an MAP-1 or MAP-2 ALEXA Mini Adapter Plate, the Mini Broadcast Plate, or the CBP-1 Compact Bridgeplate.

Features

• Attaches to the ARRI ALEXA Mini via an adapter plate (available separately)
• Provides multiple 3/8"-16 and 1/4"-20 accessory mounting points
• Can be used to mount the RMB-3 Rod Mounting Bracket and MSB-1 ALEXA Mini Side Brackets
• Attaches to an MAP-1 or MAP-2 ALEXA Mini Adapter Plate, the Mini Broadcast Plate, or the CBP-1 Compact Bridgeplate (all available separately)

ARRI Rod Mounting Bracket (RMB-3)

Use the Rod Mounting Bracket (RMB-3) from ARRI to support a single, standard 19mm rod for mounting a lens motor, lightweight EVF bracket, etc. to your camera or cage rig. When used with a separately available insert, the RMB-3 can be used to support a 15mm rod. A mounted rod is easily secured using the thumb lever on this screw-in bracket.

Rod Compatibility

• 19mm
• 15mm (with separately available insert K2.66255.0)

ARRI Single Support Rod (3.5", 19mm)

The lightweight ARRI Single Support Rod (3.5", 19mm) is designed to support a lens motor driving an Ultra or Master Prime lens mounted in the ARRI SAM-3 Stabilizer Adapter Mount. This stainless steel rod may also be used for any rig where space constrictions dictate the use of a shorter 19mm rod.

ARRI Single Support Rod (5.9", 19mm)

The lightweight ARRI Single Support Rod (5.9", 19mm) is designed to support a lens motor driving an Ultra or Master Prime lens mounted in the ARRI SAM-3 Stabilizer Adapter Mount. This stainless steel rod may also be used for any rig where space constrictions dictate the use of a shorter 19mm rod.

ARRI 15mm Reduction Insert for 19mm Rod

The ARRI 15mm Reduction Insert is used to adapt a 19mm rod bracket to accept standard 15mm rods. This insert works with any 19mm rod mount.

ARRI Lightweight Adapter Plate for ALEXA Mini MAP-1

Use the Lightweight Adapter Plate for ALEXA Mini MAP-1 from ARRI to attach accessories, and/or brackets to the camera body. In addition to 3/8"-16 and 1/4"-20 threaded holes, the MAP-1 Plate provides interfaces for attaching the MSB-1 Mini Side Bracket, and the RMB-3 Rod Mounting Bracket.

ARRI MVB-1 Viewfinder Mounting Bracket for ALEXA Mini

Use the ARRI MVB-1 Viewfinder Mounting Bracket to mount the MVF-1 electronic viewfinder to an ALEXA Mini camera. This bracket provides adjustable positioning of the EVF via 15mm LWS rods and the viewfinder mount. The separately available MAP-2 adapter plate is required for 15mm rod support on the ALEXA Mini.

Compatible Cameras

• ALEXA Mini

ARRI CCH-2 Center Camera Handle

Expand your options for mounting HD camera accessories like monitors, transmitters, mic holders, French flags, etc., on your ARRI camera rig by using the ARRI CCH-2 Center Camera Handle. This sturdy carrying handle screws onto a UAP-2 adapter plate (available separately), and features multiple 3/8"-16 and 1/4"-20 threaded holes for attaching accessories. Designed for use with ALEXA M, ALEXA Mini, and AMIRA cameras, it will also work with many ARRI accessory-equipped third-party cameras.

Features

• Sturdy carrying handle attaches to a UAP-2 adapter plate (available separately) to provide accessory mounts
• Adds multiple 3/8"-16 threaded mounting points to an AMIRA and ALEXA M/Mini Camera, or third-party cameras using ARRI support systems

ARRI Handle Extension Block (HEB-1)

Attach the ARRI Handle Extension Block (HEB-1) to the CCH-1 Center Camera Handle to add length, and three 3/8"-16 threaded mounts to the carrying handle. This extension may also be screwed to any standard UNC 3/8"-16 threaded mount, and can be used with both ARRI and third-party cage rigs.

ARRI ALEXA Mini/AMIRA Straight Power Cable KC-50 (6.6')

Use the ALEXA Mini/AMIRA Straight Power Cable from ARRI to connect the camera to a battery with a 3-pin XLR connector.

ARRI ALEXA Ethernet/RJ45 Cable (KC 153-S, 9.8')

The ARRI ALEXA Ethernet/RJ45 Cable (KC 153-S, 9.8') is designed with a 10-pin LEMO connector on one end, and an RJ45 connector on the other. Use this cable to link your ALEXA to the Ethernet for updates, camera remote control, or service functions.

ARRI EXT-RS Adapter ALEXA Mini/Mini LF

Use the ARRI EXT-RS Adapter to convert an ALEXA Mini or Mini LF's external sync port into a 3-pin RS connection. This short right-angle to straight adapter cable can be used with a compatible accessory to provide RUN/STOP capability.

ARRI Battery Adapter Plate BAP-2

The ARRI Battery Adapter Plate BAP-2 is designed for use with an IDX or Gold mount battery adapter plate on an ALEXA Mini. This accessory places the battery to the side of the camera body, minimizing the length of the camera to suit stabilizer, drone, and other compact rig setups.

Side-Mount Design

Minimizes the overall length of the camera rig for use with drones, stabilizers, or other compact setups

ARRI Stabilizer Plate for CBP

The ARRI Stabilizer Plate for CBP enables the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for the ALEXA Mini (SAM-2). Compatible with third-party, standard 60mm dovetails, this plate serves as the bottom half of a camera-balancing bridge plate system.