ARRI Studio Upgrade Set 19mm for ALEXA Mini

The ARRI Studio Upgrade Set 19mm for ALEXA Mini provides a lightweight option for mounting 19mm Studio-standard accessories to your ALEXA Mini or Mini LF camera. A sliding balance mechanism and quick release system offer the adjustability of a studio bridge plate at a reduced weight.

The ARRI Studio Upgrade Set 19mm for ALEXA Mini include right and left rosettes, front 19mm Studio rod support, and a built-in, contoured shoulder pad. Use the CBP-1 19mm bridge plate to mount camera accessories onto a pair of separately available rods or the ARRI-standard rosettes.

Quick Mounting/Detaching

• A quick release system enables you to mount or detach the camera without sliding out the balance assembly.
• Provides a quick transition to a stabilizer's dovetail.

Optional Rod Brackets

• Add 19mm Studio rod-mounted accessories in front of your ARRI ALEXA Mini.
• Attach single or dual rod brackets as needed to save weight on your rig.

Dual Rosettes

Rosettes on both right and left sides for attaching a handgrip or other rosette-based accessory.

Contoured Shoulder Pad

Integrated, contoured shoulder pad increases comfort while operating handheld.

ARRI Bottom Dovetail Plate (12")

This 12" Bottom Dovetail Plate from ARRI is used with a sliding bridge plate or sled to balance your camera rig. To prevent the bridge plate or sled from sliding off, the Dovetail Plate features a spring-loaded post on one end and a stationary stop on the other. The bottom of the plate incorporates 3/8"-16 threaded holes for mounting the dovetail to a tripod quick release plate or other support.

• Use with a sliding bridge plate or sled to balance your camera rig (plate or sled not included)
• Includes a spring-loaded post on one end, and a stationary stop on the other to prevent the bridge plate or sled from sliding off
• Bottom of dovetail includes 3/8"-16 threaded holes for mounting to a tripod quick release plate or other support

ARRI Rear Accessory Bracket RAB-1

The ARRI Rear Accessory Bracket RAB-1 is designed to mount accessories like battery plates or power-splitting boxes to the ALEXA Mini camera body. This curved bracket screws onto the camera providing a rib-like structure on which to attach a power solution. Use the RAB-1 bracket with the separately available RAB-1 Clamp to attach an ARRI Power Splitting Box, or a BAP-1 Battery Adapter Plate.

ARRI RAB-1 Clamp

The ARRI RAB-1 Clamp is used to mount an ARRI battery plate or power-splitting box to the separately available RAB-1 Rear Accessory Bracket for the ALEXA Mini camera body. This clamp features a slide-in design with a thumb-lever release.

ARRI SAB-1 Side Accessory Bracket for ALEXA Mini

The ARRI SAB-1 Side Accessory Bracket fits onto an ALEXA Mini adapter plate, providing multiple points for attaching accessories to the camera (adapter plate available separately). In addition to 3/8"-16 and 1/4"-20 threaded holes, the SAB-1 provides interfaces for attaching the RMB-3 Rod Mounting bracket and MSB-1 Mini Side Brackets. The SAB-1 Bracket can be mounted to an MAP-1 or MAP-2 ALEXA Mini Adapter Plate, the Mini Broadcast Plate, or the CBP-1 Compact Bridgeplate.

Features

• Attaches to the ARRI ALEXA Mini via an adapter plate (available separately)
• Provides multiple 3/8"-16 and 1/4"-20 accessory mounting points
• Can be used to mount the RMB-3 Rod Mounting Bracket and MSB-1 ALEXA Mini Side Brackets
• Attaches to an MAP-1 or MAP-2 ALEXA Mini Adapter Plate, the Mini Broadcast Plate, or the CBP-1 Compact Bridgeplate (all available separately)

ARRI Single Support Rod (3.5", 19mm)

The lightweight ARRI Single Support Rod (3.5", 19mm) is designed to support a lens motor driving an Ultra or Master Prime lens mounted in the ARRI SAM-3 Stabilizer Adapter Mount. This stainless steel rod may also be used for any rig where space constrictions dictate the use of a shorter 19mm rod.

ARRI Single Support Rod (5.9", 19mm)

The lightweight ARRI Single Support Rod (5.9", 19mm) is designed to support a lens motor driving an Ultra or Master Prime lens mounted in the ARRI SAM-3 Stabilizer Adapter Mount. This stainless steel rod may also be used for any rig where space constrictions dictate the use of a shorter 19mm rod.

ARRI Stabilizer Plate for CBP

The ARRI Stabilizer Plate for CBP enables the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for the ALEXA Mini (SAM-2). Compatible with third-party, standard 60mm dovetails, this plate serves as the bottom half of a camera-balancing bridge plate system.