ARRI TRINITY 2, Basic Set

Add dynamic moves along any axis to your footage using the TRINITY 2 Hybrid Stabilizer. This five-axis stabilizer system combines the TRINITY ring-style gimbal with the ARTEMIS 2 mechanical stabilizer. Developed by and for operators, the TRINITY 2 has been redesigned with 80% new components with a focus on freedom of movement, intuitive control, and speed of setup. It features 360° camera rotation, intuitive control using the Master Grip TRINITY or the RCP-3 Control Panel, and the ability to mix and match 12 and 24V ARRI B-mount, Gold mount, and V-mount batteries.

Limitless Motion

Create seemingly impossible moves along any axis using the TRINITY 2 stabilizer and your cine-style or broadcast camera. This vest and arm-mounted combination of the ARRI ARTEMIS 2 mechanical stabilizer and the TRINITY 2 electronic gimbal ring is especially suited for transitioning between high and low modes or vice versa.

This 2nd generation TRINITY offers 360° camera rotation with a selection of detachable cables that enable a greater number of turns. The redesigned head is now completely symmetrical, evening out the rig's weight distribution to enable smoother whip-pans and to lessen imbalances during high-speed moves. A new rod design provides greater clearance between your camera and the base of the head and the gimbal motors are now located at the bottom of the head, enabling you to offset their weight by positioning your FIZ motors at the top of the head.

Head Interfaces

Operator-friendly TRINITY 2 updates include moving all the sockets to the back surface to lessen the setup time, adding a cutout on the motor housing so the position marks are easier to view, a left-side radio module bracket, a spirit level on the back, and increasing the number of accessory interfaces and counterweight mounting points. The head display screen features an improved GUI and 12G video, LBUS, and broadcast-type ports to ensure compatibility with an array of camera components.

Top Stage

The new top stage outputs both 12 and 24V to power the latest cine-style cameras and incorporates a 16-pin main connector for faster data transfer. Positioned at the bottom of the rig when in the TRINITIY 2 configuration, the top stage now has engraved connection indicators to speed up your setup. Up to three of the new SAM ZERO camera plate cans be stacked on the top stage to raise smaller cameras to the proper height while adding some needed weight. Attach 3/8"-16 screw-in weights using the multiple threads on the SAM plates to counterbalance the rig.

Specifications:

• Gimbal Load Capacity: 66.1 lb / 30 kg
• Number of Axes: Five
• Rotation Range: Pitch (Tilt): 170° (-110 to 60°), Roll: 360° Unlimited
• Camera Control: On Compatible Models
• Operating Voltage: 12.0 to 24.0 VDC