Chrosziel Zoomer Universal Servo Drive Motor

The Chrosziel Zoomer Universal Servo Drive Motor seamless operation with your current LANC zoom rocker. Moreover, it interfaces with handgrip controls on Sony's FX6, FX9, FS5, and FS7 cameras. Mounting the Zoomer involves sliding it onto a single 15mm rod and positioning it against your lens, securing it in place by tightening it onto the rod, ensuring a stable setup for efficient zoom control during shooting.

The Chrosziel Zoomer Universal Servo Drive Motor supports 10 to 20 VDC power, and it comes with a D-Tap to LEMO-type 0B-5 pin connector for powering it via a D-Tap power source, such as a V-mount or Gold mount battery. An included lens gear belt can mount on manual lenses without gear with a diameter of 2.3 to 4.7".

• The Sony FX6/FX9/FS5/FS7 handgrip zoom rocker direct;y controls the Zoomer servo drive unit
• Other zoom rockers with LANC protocol are also compatible
• Control commands are looped through to the camera, including menu, user buttons, focus magnification, and camera run/stop
• When using a standard LANC zoom rocker or handle with the Sony PXW-FS5, PXW-FS7, and PXW-FS7II, the servo is connected between the handle and the camera via an input and an output jack to receive all zoom control signals
• For the Sony PXW-FX9 camera, an included Y-cable is used that accepts the Sony multi-connector and connects to both the input jacks of the Zoomer and the camera
• For the Sony FX6 camera, the included cable connects the 3.5mm connector of the Sony handgrip, the input jack of the Zoomer, and the Sony camera