Core SWX NANO Micro 98Wh Li-Ion 2-Battery Kit with Dual Travel Charger for RED KOMODO (V-Mount)

The Core SWX NANO Micro 98Wh Li-Ion 2-Battery Kit with Dual Travel Charger for RED KOMODO (V-Mount) includes two lightweight, ultracompact V-mount batteries, a GPM-X2S dual charger, and a V-mount battery plate for the RED KOMODO cinema camera.

Each battery features a 14.8V 98Wh capacity, supports a continuous 10A draw, and provides both a 12V D-Tap output that can also be used to charge the battery and a 5V USB Type-A port to charge smaller devices such as a smartphone. The V-mount plate is specifically designed to mount onto the back of RED KOMODO camera using the camera's dual battery plate, leaving the camera's DC power port open, so you can utilize the hot-swap function when plugged into mains power. It also features one 11.9 to 17 VDC D-Tap output, one 5 VDC USB output, and one 11.9 to 17 VDC 2-pin LEMO-type output to power accessories.

The Core SWX NANO Micro 98Wh Li-Ion 2-Battery Kit charger features a compact design that makes it easy to travel with. It can simultaneously charge both V-mount batteries at 1.5A each. It can also charge a single battery using 3A in less than 2.5 hours.

Core SWX NANO Micro 98Wh Lithium-Ion Battery (V-Mount)

Power your monitor, recorder, wireless equipment, or drone with the V-mount NANO Micro 98Wh Lithium-Ion Battery from Core SWX. The lightweight, ultracompact battery features a 14.8V, 98Wh capacity and supports a continuous 10A draw.

The battery provides one 12V D-Tap output to power your camera, light, or accessories, and it can also be used as an input to charge the battery. It also features one 5V USB-A port to charge smaller devices such as a smartphone. It provides approximately 3.6 hours of battery life, and the 4-stage LED gauge shows the battery level status. The NANO Micro can be charged on a Core SWX V-mount charger or most third-party V-mount charger.

Note:

Always check with your airline as battery regulations may change.

Key Features

• The NANO Micro features a 14.8V, 98Wh capacity that lasts up to 3.6 hours

• A 4-stage LED gauge displays the battery power level

• You can charge the battery on a Core SWX V-mount charger or most third-party V-mount chargers

• Power equipment using one 12V D-Tap output that can also be used to charge the battery

• One 5V USB-A output can be used to charge smaller equipment such as a smartphone

Core SWX GPM-X2S Mini Dual Travel Battery Charger (V-Mount)

Charge your V-mount batteries while traveling with the GPM-X2S Mini Dual Travel Battery Charger from Core SWX. Taking advantage of the same technology built into the larger fleet chargers, this compact travel charger can charge a single battery at a 3A rate or two batteries simultaneously at 1.5A. Since it sits vertically with two batteries mounted, the GPM-X2S takes up less space than traditional chargers.

Note:

Always check with your airline as battery regulations may change.

Core SWX Battery Plate for RED KOMODO (V-Mount)

Power your RED KOMODO camera as well as a monitor, recorder, light, focus motor, wireless equipment, or other accessories with this dedicated V-mount Battery Plate from Core SWX. The plate enables you to use a professional, high-capacity V-mount battery to power your camera, while leaving the camera's DC input free, enabling hot-swap battery changes with available AC power. It mounts directly onto the integrated dual BP-U battery plates on the RED KOMODO camera.

The plate features integrated D-Tap, USB Type-A, and 2-pin LEMO-style outputs to power a variety of select accessories. It also features a USB Micro-B firmware update port, reinforced V-mount locking, and red/green LED status indicators. This plate will pass smart battery data through to the KOMODO camera such as remaining battery percentage, runtime, and capacity.

Note:

Always check with your airline as battery regulations may change.

Features

• Leaves the AC power input on the RED KOMODO free, enabling hot-swap battery changes when connected to AC power

• D-Tap, USB Type-A, and 2-pin LEMO-style accessory outputs

• Passes smart battery data through to your camera

• Reinforced V-mount locking plate

• Green and red LED status indicators