The Deity Microphones SPD-HR21 4-Pin Hirose to 2.1mm DC Barrel Jack Cable is unregulated and should be used for a receiver or other 9 to 18V startup device only. If you are using this for an output to a 2.1mm locking dc input device (requiring a regulated volt), please use a different cable or do not hook up equipment with the Deity Microphones SPD-HR21 4-Pin Hirose to 2.1mm DC Barrel Jack Cable.
Compatibility
This Hirose 4-pin port-compatible cable is capable of working with the following components:
Lectrosonics UCR411
Lectrosonics UCR401
Lectrosonics UCR211
Lectrosonics UCR201
In the Box
Deity Microphones SPD-HR21 4-Pin Hirose to 2.1mm DC Barrel Jack Cable
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
If you want to share this elsewhere, you can click the link below to copy it