Kondor Blue EDC Multi-Tool Bit Driver (Raven Black)

The Kondor Blue EDC Multi-Tool Bit Driver (Raven Black) isn’t just for the film set or the studio. It’s at home in your pocket or pack, in your car or garage – anywhere you might want an EDC tool that you’ll use often. This Kondor Blue EDC Multi-Tool Bit Driver (Raven Black) sculptural raven-black Zippo-inspired tool’s lid opens by flipping it over so that the side with five 1" driver bits is exposed. At the end lengthwise, three 2" bits are tucked in and held in place by spring-loaded ball bearings. (The ball bearings within the tool, combined with the open-ended casting, make the multi-tool a fidget toy, too.) A bit socket is at one end of the tool, as if it were a screwdriver, and two others on the side allowing for more leverage. Magnetically held in their sockets, bits can be used with the multi-tool at the end and in the side sockets simultaneously. The tool has been fitted with a bubble level. The multi-tool has a pocket clip, with a loop that an optional lanyard can be attached to.

• 1" bits: Phillips #2, 3/16" hex, 1.5mm hex, 2.5mm hex, 3mm hex
• 2" bits: Flat, 2mm hex, 4mm hex
• Drive mode: Use bit in socket at top of tool for screwdriver feel
• Torque mode: Use bit in side of tool for better leverage
• Bits held in sockets magnetically
• Magnetically closing lid
• Bubble level
• Pocket clip with loop for optional lanyard