Kupo Grip Arm Support
- Designed to be used with c-stands for large accessories
- Built in ball joint that rotates 360 degrees for infinite flexibility
- Extends from 22-30.7" (56-78cm)
- Primary Material Aluminum
- Secondary Material Stainless Steel Bolts
The Kupo Grip Arm Support is designed to be used with c-stands when a large accessory needs to be attached. Generally when you extend a large accessory such a flag or light fixture laterally past the center column of a C stand, the increased leverage may be too much for the grip head to bear. In the old days you could rectify this situation using another C stand as an additional support, or a combination of clamps, grip heads and grip arms.
Kupo has developed an innovative solution that rapidly mounts between both the riser section of a Master C Stand with help of either a Kupo 3 or 4 Way Clamp, and to a grip arm with the help of the included Kupo Tiny clamp already mounted on the other side of the Grip Arm Support. The Grip Arm Support has a built in ball joint that rotates 360 degrees for infinite flexibility and extends from 22-30.7" (56-78cm). With the addition of the Grip Arm Support, the load capacity at the end of your grip arm is greatly increased.
|Length||22.88 in (58.1 cm)|
|Width||2.43 in (6.18 cm)|
|Height||1.48 in (3.75 cm)|
|Weight||1.1 lbs (0.5 kg)|
|Secondary Material||Stainless Steel Bolts|
|Minimum Jaw Diameter||0.08 in (2 mm)|
|Maximum Jaw Diameter||0.63 in (16 mm)|