Kupo Max Arm

  • Adjustable arm
  • Two 5/8" (16mm) studs
  • Ball joints rotate 360 degrees
  • One stud is tapped to receive a 3/8"-16 thread
  • Another stud receives a 1/4"-20 thread
  • Central elbow rotates 360 degrees

The Kupo Max Arm is an adjustable arm that allows you to position a camera, lighting fixture or accessory in any position within seconds!

The two 5/8" (16mm) studs at either end are attached to ball joints that rotate 360 degrees, plus a cut-out in the sleeve surrounding the ball allows the stud to be bent 90 degrees. One stud is tapped to receive a 3/8"-16 thread, while the other is tapped to receive a 1/4"-20 thread. Each stud has six milled flat surfaces, so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability.

The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. The large rubberized hand wheel slowly increases tension until all three joints lock at once making precise positioning a breeze.


Length    21 in (53.34 cm)
Width 5.56 in (14.13 cm)
Height 1.67 in (4.23 cm)
Weight 2.2 lbs (1 kg)
Primary Material Aluminum
Secondary Material Thermoplastic Rosettes
Maximum Extension 20.87 in (53 cm)
Maximum Load 8.82 lbs (4 kg)

Catalog# KG100211

More Information
SKU 21359
Customer Reviews
Copyright © 2019 Filmtools, a Magnasync/Moviola Company.