- Paypal Credit
Libec RH45D Fluid Head
- 26.5 Max Payload
- 75mm Half Bowl (Flat-Mount Compatible)
- Continuous Adjustable Counterbalance
- 2 Grades of Pan Drag
- Sliding Balance Plate
- Illuminated Bubble Level
- Includes PH-6B Extendable Pan Handle
The Libec RH45D Fluid Head is a fluid head that was designed to be versatile with standard features in the entertainment world. This fluid head has the ability to carry setups of up to 26.5lb, and was built with a unified ball/flat mount. That means that the base can fit on a standard 75mm bowl or a flat mount with a 3/8"-16 screw. To put this into perspective you can transfer the RH45D from a bowl mount to a flat-mount slider hassle free.
To achieve proper balance, the head includes a sliding camera plate with 1.6" of fore/aft adjustment. The screw and locating pin are moveable to orient the plate on the camera to achieve the best possible balance. Once the camera is balanced, the continuous counterbalance and pan/tilt drag controls provide a smooth action with reduced backlash and unnecessary "bouncing".
Included with the head is a PH-6B pan handle. The handle is extendable for better reach or more precise movement. The bar can be placed on the right or left side of the head by screwing it onto one of the rosettes.
This fluid head is equipped with an continuously adjustable counterbalance system that can be fine-tuned to provide the correct amount of counterforce that corresponds to the weight and angle of your camera. Different cameras can be used and correct counterbalance can be set for each camera configuration.
Fluid Drag System
The fluid drag mechanism reduces backlash that can occur at the beginning or end of panning/tilting moves.
Low Temperature Performance
The RH25D is rated to be used in temperatures down to -40°F without seriously impacting the performance of the fluid drag system.
- Libec RH45D Fluid Head
- PH-6B Extendable Pan Bar Handle for RH25D and RH45D Video Heads
- Limited 3-Year Warranty