Light & Motion Stella 2000 LED Light - 5000K

The Light & Motion Stella 2000 LED Light - 5000K is a daylight-balanced LED that provides many features that would make this an ideal on-camera source. Because of its form factor and small weight, it can easily be transported. It provides a clean and accurate color rendering output, and as well as 90 CRI/TLCI.

The Stella 2000 has a wide 120 degree beam that can be narrowed with the included 50° focus optic or softened with the optional diffuser. The fan-less design is dead quiet for sound-sensitive locations and is dimmable either continuously or in steps. And, the housing is durably built. Not only can it survive repeated dropping on concrete from a height of 3.3', but it's also waterproof to depths of 328 feet!

The unit is powered by a built-in battery that charges in 1.0 hr. to 80% and 1.75 hr. to full charge, giving you a run time of 50 to 415 minutes depending on the power selected. You can also run the light from a D-Tap external battery source for longer shoots. Additionally, you can use mains power anywhere in the world thanks to the inclusion of a multi-voltage AC power supply. The Stella 2000 also comes with an external AC power supply, a 4-way barndoor set, and a 1/4"-20 adapter.

Benefits

• High output Chip on Board (COB) LED
• Certified 90 CRI and 90 TLCI, CCT 5000 Kelvin
• Integrated, rechargeable, Li-ion battery provides 50 to 415 minutes of cord-free operation
• Flicker-free firmware design
• Regulated lumen output - does not fade during use
• Dimming with continuous or stepped control
• Fan-free thermal management for silent operation
• Wide 120° beam angle
• Broad range of accessories including Profoto and Chimera adaptability
• Colored LED indicators give accurate battery status
• Runs off wall power or D-Tap, 12V, external battery kit
• Fast charge of 1.0 hr. to 80% and 1.75 hr. to full charge
• Certified performance (FL-1 standard)