Light & Motion Stella Pro 555 5000 SP 3-Light Kit w/ Accessories - 5000K

The Light & Motion Stella Pro 555 5000 SP 3-Light Kit w/ Accessories - 5000K is a lighting kit that includes 3 Stella Pro 5000 LED fixtures, three sets of light modifiers, three stands and a 38" rolling case. The Stella light is a 5000K LED light that is rated at 90 CRI and 93 TLCI. This means it creates a good color reproduction. They provide a flicker free experience, 120° beam angle, and are waterproof to a depth of 328'.

The Pro 5000 has an integrated handle for handheld use. The handle doubles as a light stand mount. A built-in battery can be charged to 80% capacity in 1.5 hours and two hours for a full charge. The light modification kit includes a 25° lens that you can swap with the 50° that your light comes with, a speed ring for mounting a softbox or 3 x 3 gel filters, and a Glo Bulb for creating soft almost sourceless light. The Kupo click stands snap together for storage, and you can use the 38" rolling case to transport and store your gear.

Stella Pro 5000 LED Light

The Stella Pro 5000 LED Light from Light & Motion is a daylight-balanced LED source that packs enough features to cause many users to call it their ideal on-camera source. For location work, the Stella Pro 5000 is hard to beat. With a very small form factor and weight of only 2.5 lb, it's barely noticeable in your kit case. What is noticeable is the clean, accurate color rendering output from the unit's flicker-free COB LED that gives it a rating of 90 CRI and 93 TLCI.

The Stella Pro 5000 has a wide 120 degree beam that can be narrowed with the included 50° focus optic or softened with the optional diffuser. The fan-less design is dead quiet for sound-sensitive locations and is dimmable either continuously or in steps. And, the housing is durably built. Not only can it survive repeated dropping on concrete from a height of 3.3', but it's also waterproof to depths of 328 feet!

The unit is powered by a built-in battery that charges in 1.5 hr. to 80% and 2.0 hr. to full charge, giving you a run time of 90 to 720 minutes depending on the power selected. You can also run the light from a D-Tap external battery source for longer shoots. Additionally, you can use mains power anywhere in the world thanks to the inclusion of a multi-voltage AC power supply. The Stella Pro 5000 also comes with a 50° Focus Optic, 4-way barndoor set, high leverage handle, stand mount, and an external power supply.

Benefits

• High output Chip on Board (COB) LED
• Certified 90 CRI and 93 TLCI, CCT 5000 Kelvin
• Integrated, rechargeable, Li-ion battery provides 90 to 720 minutes of cord-free operation
• Flicker-free firmware design
• Regulated lumen output - does not fade during use
• Dimming with continuous or stepped control
• Fan-free thermal management for silent operation
• Wide 120° beam angle
• Broad range of accessories including Profoto and Chimera adaptability
• Colored LED indicators give accurate battery status
• Runs off wall power or D-Tap, 12V, external battery kit
• Fast charge of 1.5 hr. to 80% and 2.0 hr. to full charge
• Certified performance (FL-1 standard)

Light Modifier Kit for Stella 2000 & All Stella Pro Lights

The Light Modifier Kit for Stella 2000 and All Stella Pro Lights from Light & Motion gives you three ways to alter or manipulate the quality and spread of light coming from these fixtures. The kit includes a 25° Fresnel Lens to narrow and focus the light output and a Speed Ring Gel Holder to mount softboxes or 3x3" filters. The kit also includes a Glo Bulb to mount your light overhead, above your subjects in situations like round table discussions or interviews.

Midi Click Stand (8')

This black-finished Midi Click Stand from Kupo is an air-cushioned stand that rises to a height of 8' while supporting 11 lb and weighing 2.86 lb. The stand features a unique four-way interlocking design that allows it to click or un-click from a bundle of four, and can be carried with an optional shoulder strap. The stand has center struts for maximum stability and comes with a 5/8" top stud with 3/8" thread, with an additional male 1/4"-20 removable thread.

Benefits

• Bi-color injection knob offers a positive locking and ergonomic grip
• Quick-release clamp design on the central column for quick and easy setup
• Equipped with a 5/8" top stud with 3/8" thread and removable 1/4"-20 threaded top
• Double leg struts for extra stability and strength

38" Rolling Tripod/Grip Case

The Tenba 38" Rolling Tripod/Grip Case (Black) is a hand-built case designed to carry tripods, light stands, umbrellas, collapsible light modifiers, reflectors & other accessories up to 38" in length. It is made from weather-repellent 1050 denier ballistic nylon, with air-channel ABS walls, thickly padded bottom board to protect the contents and an interior that is lined with smooth nylon. The case has a large, full-access opening that makes it easy to load and unload the gear and triple tie-down straps that keep the load from shifting and contents from banging. It is transported by heavy-duty, reinforced web handles or industrial grade, ball bearing wheel assemblies.

This case is made in Brooklyn, New York.

Construction

• Weather-repellent 1050 denier ballistic nylon
• Air-channel ABS walls
• Thickly padded bottom board to protect contents
• Interior lined with smooth nylon
• Zipper closure
• Large, full-access opening makes it easy to load and unload gear
• Triple tie-down straps keep load from shifting and contents from banging

Carrying options

• Heavy-duty, reinforced web handles for serious professional use
• Industrial grade, ball bearing wheel assemblies make moving heavy loads easier than ever