The RED DSMC Bolt Kit comes complete with 46 hand screws and hardware pieces to update your DSMC system and tactical mounting components. While the RED SIDEWINDER™ has the entire arsenal of hand tools needed to update your DSMC BRAIN.
The RED SIDEWINDER™ comes complete with the following keys:
SAE Hex: 1/8", 5/32", 3/16"
Metric Hex: M2.5, M3
Torx: T6, T8, T10, T20
Screwdrivers: Slotted, Phillips #1
In the Box
(1) RED SIDEWINDER
(6) M3 x 6 mm Torx screws (T10; Bottom fan, side plates, EPIC rear panel)
(6) M3 x 5.5mm Torx screw (T10; SCARLET side)
(4) 1/4”-20 x 5/8” Hex screws (3/16” Hex; Tactical attachments)
(4) M2.5 x 6 mm Torx screw (T8; Top hood scoop)
(4) M3 x 10 mm Torx screw (T10; REDMOTE V-Mount)
(4) M4 x 8 mm Hex screw (3.0 mm Hex; Backpack Base Plate)
(3) 1/4”-20 x 3/8” Hex screw (3/16” Hex; Spinner guide and mount)
(2) 1/4”-20 x 12 mm Hex screw (3/16” Hex; Tactical Left Plate, Tactical Right Plate, Tactical Support Ribs, Tactical Top Plate Rod Adaptor, Tactical Top Plate 2.0)
(2) M4 x 8 mm Torx screw (T20; Lens Mounts and RED MOTION MOUNTs)
(2) 1/4”-20 x 3/8” Hex screw (3/16” Hex; SWAT rails, Matte Box Support, Tactical EVF Mount, Dual Outrigger Handle)
(2) M3 x 12 mm Torx screw (T10; Tactical Left Adaptor, Tactical Bottom Adaptor, Tactical Z Adaptor)
(2) 3/8”-16 x 14 mm Slotted screw (Slotted screwdriver; Mounting Plate, Modular Assault Plate, Modular Base Plate)
(2) 1/4”-20 x 1” Hex screw (3/16” Hex; Rosette to Guide Adaptor)
(1) 1/4”-20 x 14 mm Slotted screw (Slotted screwdriver; Mounting Plate, Modular Assault Plate, Camera Guide Platform)
(2) M2 x 4 mm Torx screws (T6; DSMC Interchangeable OLPFs)
Prop65 WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
If you want to share this elsewhere, you can click the link below to copy it