$1,900.00
Financial Options Available
  • Affirm
  • Paypal Credit
Learn More
Requesting a Quote?
Looking for better pricing for an item? Create a new company account now togain access to quoting, quick ordering, and more. Learn more details here.
See an issue on this page? Let us know.
SKU
54393
MPN
720-0045

RED DSMC2 V-LOCK I/O Expander

0 reviews
Questions about this product?
  • DC Power input (DC IN)
  • HDMI 1.2 output (Type A socket)
  • 3G-SDI output (HD-SDI, 75 Ω BNC)
  • CTRL & SYNC ports (2x 00B LEMO 4-Pin, Timecode and Genlock support)
  • AUX Power output (P-Tap 2-Pin female)
  • USB Power output (Type A, 5 V at 1.5 A for powering HDMI transmitters or small mobile devices)
  • Stereo Headphone output (3.5 mm jack)
  • Stereo Analog input (3.5 mm jack)
With the DSMC2 V-Lock I/O Expander, your DSMC2 camera can access a variety of Input/Output connections along with a standard V-Lock mount for RED BRICK battery mounting. The lightweight and durable magnesium expander module mounts directly to the rear of the cmera and offers the following connections.
  • DC Power input (DC IN)
  • HDMI 1.2 output (Type A socket)
  • 3G-SDI output (HD-SDI, 75 Ω BNC)
  • CTRL & SYNC ports (2x 00B LEMO 4-Pin, Timecode and Genlock support)
  • AUX Power output (P-Tap 2-Pin female)
  • USB Power output (Type A, 5 V at 1.5 A for powering HDMI transmitters or small mobile devices)
  • Stereo Headphone output (3.5 mm jack)
  • Stereo Analog input (3.5 mm jack)

The DSMC2 V-Lock I/O Expander also features a selector switch that enables the BRAIN to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.

This expander is an ideal solution for a wide variety of production environments—from low-profile run-and-gun situations to studio shoots that require mobility.

More Information
SKU54393
BrandsRED
MPN720-0045
Product ConditonNew
Specifications
Dimensions (H x W x D) 4.57 in. x 4.94 in. x 2.25 in.
(116mm x 125.5mm x 57.2mm)
Weight 1 lbs (454g)
Material Magnesium
Brain Mounting 4x M4 captive mounting screws
Brain Connections Power delivery via Rear pogo connector (13-Pin)
Communication via Rear I/O connector (4×40 Pin
Connectors DC IN (6-Pin 1B LEMO socket)
3G-SDI output (75 Ω BNC), 60 Hz max frame rate
HDMI 1.2 output (Type A socket), 60 Hz max frame rate
SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
USB Power output (Type A socket), 1.5A
P-Tap Aux Power output (2-Pin), 3.0A
Stereo Analog Microphone input (3.5mm jack)
Stereo Headphone output (3.5mm jack)
Auto Boot on Power 2-Position slider switch
Battery Compatibility RED Brick
Audio 24-bit, 48 KHz, uncompressed, unbalanced mic level
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature –20°C to 50°C (–4°F to 122°F)
Operating Humidity 0% to 85%, non-condensing
Storage Humidity 0% to 85%, non-condensing
Firmware Requirement Compatible with all DSMC2 firmware v6.2.17 or later
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Copyright © 2024 Filmtools, a Magnasync/Moviola Company.