- Paypal Credit
SmallHD 1703 P3 Studio 17" Production Monitor
- 17 inch, 1920x1080 Display monitor
- Astounding color accuracy
- (2) SDI and HDMI Inputs
- (2) SDI and HDMI Outputs
- 450 cd/m² Panel
- 100% DCI-P3 Color Gamut
- Pagebuilder OS
The SmallHD 1703 P3 Studio 17" Production Monitor is perfectly engineered for production and post-production use. The Full HD wide color gamut reference grade monitor boasts astounding color accuracy covering 100% DCI-P3. The IPS LCD 17" display features a 1920 x 1080 resolution, 133ppi, 1500:1 contrast, 179 degrees vertical and horizontal viewing angle and adujustable 0 -100 backlight.
Page Builder OS
Originally featured in the 500 and 700-series models, and extrapolated for the Production Monitor series, the Page Builder OS is an intuitive graphical user interface (GUI) that puts all of the advanced functionality of the 12403 at your fingertips. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveforms, vectorscopes, multiview, and focusing aids to up to 4 different "pages". These pages can be easily flipped through using the joystick. The buttons on the front panel can also toggle monitoring tools on and off for each page.
Reference Grade Cinema Color
Each 1703-P3 monitor comes precalibrated for DCI-P3 mastering, Covering 100% DCI-P3 with a Delta E average of 0.5. Easily install your own 3D LUT calibration with advanced color management solutions like Light Illusion's, LightSpace CMS, or SpectraCal's CalMAN. Load any 3D LUT via SD card using SmallHD’s ColorFlow 3D LUT engine.
Software That Eliminates Hardware
Pagebuilder OS enables you to send your video signal downstream via the Output Preview page. Any LUTs applied to the Output Preview page will also be mirrored downstream. Easily convert HDMI/SDI signals with Cross Conversion.
HD Scopes with Pixel Accurate Data Analysis
Display up to three, fully customizable Scopes on screen at a time. Utilize Color Picker to show raw pixel values from the displayed video.
Expose with Confidence
Exposure Assist supports both ARRI and Spectrum based false color, with built in IRE guides for reference. Utilize 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras.
Monitor two input sources simultaneously. You can apply LUT’s and tools to each source individually. Great for monitoring A/B cameras or pre and post LUT footage. You can also apply tools to each page individually.
Custom Focus Assist & Peaking Tools
Focus assist creates a bright highlight on in-focus subject matter; highly recommended when focusing on the fly. Focus Peaking increases the image sharpness allowing more detailed focusing. Change your color and intensity of your focus tools.
Versatile Image Framing
Select standard markers and safety areas that can be overlaid on the display as lines or matte overlays with custom opacity level and colors. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9 and Custom (user selectable).
- Rugged milled aluminum housing
- VESA mounting
- 3/8” & 1/4” mounting points
- Power options
- V-Mount, Ggold Mount, AC power
- Rapid Rail
- Quickly attach wireless devices & accessories
- Table to C-stand