$1,654.00
Financial Options Available
  • Affirm
  • Paypal Credit
Learn More
Requesting a Quote?
Looking for better pricing for an item? Create a new company account now to gain access to quoting, quick ordering, and more. Learn more details here.
See an issue on this page? Let us know.
SKU
118091
MPN
SMWB-A1

Lectrosonics SMWB Wideband Beltpack Audio Transmitter/Recorder (A1: 470 to 537 MHz)

Questions about this product?
  • For Broadcast, EFP and ENG Applications
  • Digital Hybrid Wireless Technology
  • Alternate Recording Function
  • 35 Hz to 20 kHz Frequency Range
  • Runs on 1 x AA Battery (Included)
  • 44 dB of Gain Range
  • For Lavs, Dynamic Mics, or Line Levels
  • Selectable High-Pass Filtering
  • Built-In Limiter with 30 dB of GR
  • Flexible Steel-Cable Antenna

The Lectrosonics SMWB Wideband Beltpack Transmitter/Recorder offer hands-free setup and adjustment using audible tones. Lectrosonics SMWB Transmitter/Recorder be put to sleep to conserve battery power during setup while buried inside costuming, then awakened for normal operation when the production begins. Other features include input gain adjustment in 1 dB increments over a 44 dB range and adjustable low-frequency audio roll-off for 3 dB down points at 35, 50, 70, 100, 120 or 150 Hz to control subsonic and very low-frequency audio content.

Operating in the A1: 470 to 537 MHz band, the transmitter offers selectable outputs to bolster its operating range, specifically among 25, 40, and 100mW. At lower values, the transmitter’s battery life will last longer; at higher values, the operating range is increased, though at the expense of battery life. Lightweight at 2.7 oz, the transmitter boasts settings which make it compatible with dynamic microphones, electret lavaliers, and even line-level sources—so long as they can plug into the TA5M 5-pin input connector.

Input gain adjustment is possible in 1 dB increments for a total range of 44 dB. You’ll also note the low-pass filters, which can be switched to roll off at 30, 50, 70, 120, or 150 Hz to mitigate low-end disturbances. This input section also boasts servo-bias input circuitry proprietary to Lectrosonics, as well as an analog limiter controlled with DSP that, sitting ahead of the mic preamp itself, protects the audio path from overload. With its dual-release envelope, it maintains acoustic transparency, even though it can achieve over 30 dB of gain reduction.

The Lectrosonics SMWB Wideband Transmitter/Recorder utilizes DSP that renders it suitable for use with all Lectrosonics Digital Hybrid receivers, though it is also backward compatible for use with 100 and 200 series transmitters, IFB receivers, and various analog receivers from third-party manufactures. The unit is powered by one AA battery, making use of switching power supplies to offer consistent voltages to its internal circuitry throughout its battery life. One AA battery is included. 

Expanding the SMWB’s functionality is its built-in recording capability, for use when transmission is simply not possible due to the conditions of the environment. The recorder operates at 24-bit/44.1 kHz, recording .WAV files to microSDHC cards. As a transmitter, the SMWB supplies an audio frequency range of 35 Hz to 20 kHz, though during recording, that lower value extends down to 20 Hz. You cannot use the transmitter and the recorder simultaneously, but it’s nice to have the option to select between the two. The transmitter includes a flexible steel-cable antenna.

Key Features at a Glance

  • Selectable output power to maximize battery life or operating range
  • Lightweight, corrosion-resistant housing
  • Water-resistant seals for use in damp environments
  • LCD interface with lockout option
  • Programmable compatibility modes for use with a wide variety of different receivers
  • Servo-Bias input circuitry
  • IR (infrared) port for fast setup
  • Covers three standard frequency blocks
  • Update firmware in the field via MicroSD card reader
  • Can also be used as a recorder on internal microSDHC memory card
In the Box
  • Lectrosonics SMWB Wideband Beltpack Transmitter/Recorder (A1: 470 to 537 MHz)
  • AA Lithium Battery
  • Limited 1-Year Warranty
More From Lectrosonics Logo
More From Lectrosonics
View Page
More Information
SKU118091
BrandsLectrosonics
MPNSMWB-A1
Specifications

Transmitter

Transmitter Type Bodypack
RF Output Power 25 / 50 / 100 mW
Audio I/O 1 x TA5/Mini XLR 5-Pin Male Input (Lockable)
Included Cable Connector None
Plug-In Power 5 V
Audio Input Level 0.5 to 50 mV (Mic Level)
17 to 1.7 mV (Line Level)
Auto-Level Control No
Recorder Sample Rates WAV:
44.1 kHz (Record)
Recorder Bit Depths 24-Bit
Memory Card Support microSDHC
Audio File Formats Recording:
BWF
Bit Rates 144 to 192 kb/s (HD Mono Mode)
288 to 384 kb/s (Split Gain Mode)
Gain Range 44 dB
Signal Processing High-Pass Filter:
35 Hz
High-Pass Filter:
50 Hz
High-Pass Filter:
70 Hz
High-Pass Filter:
100 Hz
High-Pass Filter:
120 Hz
High-Pass Filter:
150 Hz
Frequency Response 35 Hz to 20 kHz
Sync Method IR
Antenna 1 x Flexible Whip, Detachable
Power Requirements Battery
Battery Type 1 x AA (Included)
Approx. Battery Life 4.4 Hours (Alkaline)
Display & Indicators 1 x Backlit LCD (Audio Level, Battery Status, Channel, High-Pass Filter, RF Output Power)
1 x LED (Audio Level, Peak)
Housing Aluminum
Operating Temperature -4 to 122°F / -20 to 50°C
Dimensions 2.4 x 2 x 0.6" / 60 x 49.6 x 16.3 mm
Weight 3.2 oz / 91 g

Receiver

Wireless Technology Analog/Digital Hybrid UHF (900 MHz)
RF Frequency Band A1:
470.1 to 537.575 MHz
Frequency Step Size 25 kHz
100 kHz
RF Channel Scanning Auto-Scan
Encryption None
Modulation F3E

Packaging Info

Package Weight 0.96 lb
Box Dimensions (LxWxH) 9.9 x 7.9 x 2.9"
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Customer Reviews
Copyright © 2022 Filmtools, a Magnasync/Moviola Company.