$1,200.00
Financial Options Available
  • Affirm
  • Paypal Credit
Learn More
Requesting a Quote?
Looking for better pricing for an item? Create a new company account now to gain access to quoting, quick ordering, and more. Learn more details here.
See an issue on this page? Let us know.
SKU
91061
MPN
003109

Sennheiser MKH 50 Small-diaphragm Condenser Microphone

Questions about this product?
  • Dialog Boompole Microphone
  • Pressure Gradient Condenser
  • For Spot Capture
  • For Recording / Sound Reinforcement
  • Supercardioid Polar Pattern
  • Low-Frequency Roll-Off Switch
  • Pre-Attenuation Switch
  • Uses +48V Phantom Power

The Sennheiser MKH 50 Small-diaphragm Condenser Microphone captures high-quality recording that dampens unnessecary noise for a focused audio pick up. With a wide frequency response and high sensitivity for clear audio, it is a professional condenser microphone created for spot capturing  and sound reinforcement. It also has a low-frequency roll-off switch to minimize rumble/noise, and a pre-attenuation switch in case you'll mount the microphone near to high transients. The MKH 50 requires +48V phantom power, and is more than suitable for capturing vocals or instruments.

FEATURES:

  • Dialog Boompole Microphone
  • Pressure Gradient Condenser
  • For Spot Capture
  • For Recording / Sound Reinforcement
  • Supercardioid Polar Pattern
  • Low-Frequency Roll-Off Switch
  • Pre-Attenuation Switch
  • Uses +48V Phantom Power
In the Box
  • Sennheiser MKH 50 P48 Microphone
  • Sennheiser MZS40 Elastic Suspension Mount for the MKH20, MKH30, MKH40 and MKH50 Microphones
  • Sennheiser MZW-41 Foam Windscreen (Gray)
More From Sennheiser Logo
More From Sennheiser
View Page
More Information
SKU 91061
Brands Sennheiser
MPN 003109
Specifications
Microphone
Operating Principle Pressure Gradient
Polar Pattern Supercardioid
Pad -10 dB
High-Pass Filter 30 Hz, 12 dB/Octave
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 134 dB SPL
142 dB SPL
Impedance 150 Ohms
Load Impedance 1000 Ohms
Equivalent Noise Level 12 dB A-Weighted
21 dB CCIR
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin
Power
Operating Voltage 48 V ± 4 V
Operating Current Consumption 2 mA
Physical
Dimensions ø: 0.98 x L: 5.91" / ø: 25 x L: 150 mm
Weight 3.88 oz / 110 g
Packaging Info
Package Weight 1.685 lb
Box Dimensions (LxWxH) 13.9 x 5.3 x 2.75"
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Customer Reviews
Copyright © 2022 Filmtools, a Magnasync/Moviola Company.