Teradek Bolt 300 HDMI Video Transmitter

The Teradek Bolt 300 HDMI Video Transmitter sends 4:2:2, 1080p 60 video at up to 300ft with less than 1 millisecond delay.  The Bolt Pro system is suitable for exterior and interior shoots, and it features Dynamic Frequency Selection that allows it adjust the frequency bands it is using in real time to avoid interference.

This Bolt Pro unit is the transmitter only and features an HDMI input, you can transmit to a Bolt receiver that features either an HDMI or an SDI output, allowing you to take HDMI in, transmit, and output via HDMI or SDI depending on the type of receiver you are using. You can also mix and match SDI & HDMI receiver units, up to a total of 4 receivers.

The system can transmit up to 300 feet line of sight with less than 1ms delay. Transmission through walls is possible, with reduced distance depending on the wall's construction.

1 TX to Multiple RX
The Bolt Pro system simultaneously transmits full 1080p 60 video to up to 4 receivers, and supports timecode and metadata pass through.

Connectivity
The Bolt transmits uncompressed video using WSDI Pro, which provides a wireless range of up to 300' (91.4m) and can co-exist with other wireless equipment by dynamically adjusting the frequency bands used in real time.

LED Indicators
The transmitter and receiver each feature LED indicators for Video signal, and Link.

Rugged & Low Power
Bolt transmitters are housed in a 9.2 oz milled aluminum chassis with multiple 1/4"-20 mounting holes, power is via a LEMO cable to optional external power sources such as V-mount or AB Gold-mount batteries.