Teradek RT FIZ Wireless Lens Control Kit with CTRL.3, MDR.X & MOTR.S

The Teradek RT FIZ Wireless Lens Control Kit with CTRL.3, MDR.X & MOTR.S will manipulate your lens focus, iris, and zoom wirelessly! The Teradek RT FIZ Wireless Lens Control Kit with CTRL.3, MDR.X & MOTR.S includes a wireless controller, 3-channel receiver, and a motor as described in the product description above. Some of the highlights include: - CTRL.3 wireless lens controller - MDR.X 3-channel wireless receiver - MOTR.S - compact MOTR.S has been significantly lightened up from our previous iterations, and has been optimised for rapid focus, iris and zoom adjustments - Six (6) imperial focus overlay mapping disks - Five (5) metric focus overlap mapping disks - RT CTRL iris strip sliders Set up your kit with ease thanks to the cables, mounting brackets and LP-E6 battery included. This extra-large, hard-shell case comes with customised foam, making it easy to take your entire kit on the go! Learn more about the individual elements of this kit below.

Teradek MDR.X 3-Channel Lens Control Receiver with Bluetooth

Connect this to your camera's lens support motors and drive your focus, iris, and zoom wirelessly with the MDR.X 3-Channel Lens Control Receiver with Bluetooth from Teradek. The unit is compatible with all RT motors and controllers, allowing run/stop control with a variety of cameras and camera control with RED DSMC2 cameras. The unit features two auxiliary control ports, letting you use available hardwired controllers.

An integrated OLED display allows you to easily set your device and see the settings, and you can also use the available Teradek RT app to manage, update, and configure the device. This ultracompact, lightweight unit weighs 4.8 oz and is powered via a 2-pin LEMO connector requiring 7 to 17 VDC.

Multiple Inputs/Outputs

• Three motor ports for focus, iris, and zoom
• Two auxiliary inputs for wired control (via Teradek RT thumbwheel/zoom rocker)
• One cam output for RED DSMC2 camera control

Camera Control

Run/Stop control, including but not limited to:

• ARRI ALEXA, ALEXA Mini, AMIRA, etc.
• Blackmagic
• Canon C100, C300 (MkII+), C500
• Panasonic VariCam
• Phantom
• RED DSMC2, DSMC, ONE
• Sony F5, F55, FS7 (MkII+)

RED DSMC/DSMC2 camera control:

• EF/AF focus/iris
• Shutter
• ISO
• Button features 2x magnification, edge, and focus assist

Compact and Lightweight

• The unit's small form factor makes it perfect for all camera setups, especially those on gimbals, handheld rigs, cranes, drones, and other movement rigs.

• OLED Display

• Each receiver includes an on-unit OLED display with push buttons for configuring motor axes, as well as displaying status readouts including wireless channels, battery voltage, and more.

• Wireless Range

RT FHSS

• Line-of-sight: Up to 5000' (in USA/FCC mode)
• Indoors: Up to 492'

Bluetooth 5

• Theoretical maximum range of 800' (actual range will vary)

Teradek RT App

• Manage, update, and configure every piece of your Teradek RT system via Bluetooth 5 with the Teradek RT app for iOS. Create lens maps, configure FIZ settings, perform basic camera controls, update firmware, and much more from the convenience of your smartphone or tablet.

Teradek CTRL.3 Three-Axis Wireless Lens Controller (Imperial)

For precise lens control with your Teradek RT motors and receivers, the Teradek CTRL.3 Three-Axis Wireless Lens Controller can control focus, iris, or zoom with ease. The CTRL.3 has an outdoor wireless range of 5000' and an indoor wireless range of 500'. You can also use the included 5-pin monitor interface cable to connect directly to a monitor.

The large focus knob, flexible mounting options, OLED display for configuration and lens data, and its lightweight design make the CTRL.3 accessible and easy to use. It's powered by a single LP-E6 battery (available separately) which provides approximately 36 hours of usage time. Features include a lens mapping firmware update to utilize the included pre-marked focus or iris rings for quick autocalibration when switching lenses during a shoot. The CTRL.3 comes with five white discs Type-B, a 3' USB cable, a SmallHD monitor interface cable, a large case, six pre-marked focus rings, and four Iris strip sliders.

• Run/stop control for RED (EPIC, SCARLET, WEAPON, RAVEN, etc.), ARRI (ALEXA, AMIRA, etc.), Phantom, Sony F55, and LANC cameras (Blackmagic, Canon C100/300/500, Sony FS7, etc.)

• Knob, slider, zoom x/y, and rollers (a + b)

• Lens data overlays on SmallHD monitors running OS3 allow you to get follow focus information directly on your monitor including focal distance, focal length, iris, and zoom

• MDR.X, MDR.ACI, and RT iOS app Bluetooth compatibility

• Manage, update, and configure your Teradek RT system with the Teradek RT app for iOS

• Four 1/4"-20 threads, an ARRI rosette with M6 thread, and lanyard mount for mounting

• Slot for a Canon LP-E6 battery (6.2 to 8.4V)

• 5-pin locking connector for wired mode

• USB port provides monitor interface and wired control

• Pre-marked rings come in imperial units

• FCC, IC, and CE certifications

Teradek RT MOTR.S Lens Motor

Designed to improve upon previous models, the Teradek RT MOTR.S Lens Motor is an ultra-compact, lightweight, and speedy lens control unit capable of adjusting focus, iris, or zoom functions. The motor has a maximum torque of 0.95nm and a maximum speed of 297 teeth per second. Balanced cable management ensures your 0B 4-pin connections redirect cables and prevent them from getting in the way of your camera configuration.

An improved rod clamp is compatible with both 15 and 19mm rods. One 0.8 MOD lens gear is included and separately available gears can expand lens compatibility. The MOTR.S can be daisy-chained to suit your needs. The motor supports an operating voltage up to 32V.

MOTR.S Upgrades

• More compact and lightweight form factor
• Redesigned aluminum chassis, reinforced sockets, next gen circuit boards
• New 15/19mm rod clamp with better located handle
• 0.95nm maximum torque, 297 teeth per second

Teradek Bit 718 2-Pin LEMO to LEMO Alexa Cable (18")

The 18" Teradek Bit 718 2-Pin LEMO to LEMO Cable enables you to power LEMO-compatible Teradek products such as the Teradek Bond, Cube, or Bolt via an ARRI Alexa accessory power output.

• For powering your Teradek Bond cellular solution via a LEMO power source (ARRI Alexa)

• The Bond can be placed up to 18" away from the power source

Teradek 2-Pin LEMO to P-Tap Cable (18")

This is an 18" 2-Pin LEMO to P-Tap Cable, from Teradek, for powering the 2-pin LEMO version Cube, Bolt, Bond, and Link from a P-Tap power source.

Teradek ARRI Run/Stop Cable for MDR.X Receiver (24")

The 24" Run/Stop Cable from Teradek is designed to connect an MDR.X receiver to an ARRI ALEXA or AMIRA camera.

Teradek RED Run/Stop Cable for MDR.X Receiver (16")

The 16" Run/Stop Cable from Teradek is designed to connect an MDR.X receiver to a RED camera equipped with a CTRL socket. It enables run/stop control of EF lenses.

Teradek LANC Run/Stop Cable for MDR.X Receiver (16")

The 16" Run/Stop Cable from Teradek is designed to connect an MDR.X receiver to a LANC-equipped camera such as the Sony FS-700 or FS7, Canon C300, and Blackmagic Design cameras.

Teradek 5-Pin to Micro-USB 2.0 Type-B Monitor Cable for SmallHD Overlays (16")

The 16" 5-Pin to Micro-USB 2.0 Type-B Monitor Cable from Teradek is designed to connect the CTRL.1 or CTRL.3 controller to a FOCUS Bolt and CINE 7 receivers, running PageBuilder OS3 to enable lens data overlays.

Teradek RT 5-Pin to USB Type-A Interface Cable for SmallHD 1300 & 1700 Series Monitors

The Teradek RT 5-Pin to USB Type-A Interface Cable allows you to connect the Teradek CTRL.1 or CTRL.3 lens controller to SmallHD 1300 and 1700 series monitors running the PageBuilder OS to enable lens data overlays.

Teradek RT SmallHD Monitor Interface Cable (24")

Use the 24" long Teradek RT SmallHD Monitor Interface Cable to connect your Teradek RT to your SmallHD 703 monitor. The cable features a 5-pin right-angle connector that attaches to your Teradek RT unit and a straight 5-pin connector that attaches to your SmallHD 703 monitor.

Teradek RT Wired-Mode Controller Cable (6.6')

Use this 6.6' RT Wired-Mode Controller Cable from Teradek to connect an RT controller to an RT receiver in settings like hospitals where wireless use is not practical, or not permitted. This cable is compatible with the MK3.1 Controller, MK3.1 Receiver, all Latitude MDR models, Smartknob, other RT controllers, and supported OMOD controls.

Design features include two LEMO connectors, both straight-angled. One of three lengths available, this RT Wired-Mode cable enables you to work up to 6.6' away from your camera rig.

Teradek 4-Pin Straight-Angle Motor Cable for RT MOTR.X Brushless Lens Motor (8")

This 8" Motor Cable from Teradek has a 4-pin straight-angle connector on each end. The flexible cable exits downward from the MOTR.X brushless lens motor for easy routing back to the receiver or daisy-chaining to another motor.

Teradek 4-Pin Straight-Angle Motor Cable for RT MOTR.X Brushless Lens Motor (16")

This 16" Motor Cable from Teradek has a 4-pin straight-angle connector on each end. The flexible cable exits downward from the MOTR.X brushless lens motor for easy routing back to the receiver or daisy-chaining to another motor.

Teradek 4-Pin Straight-Angle Motor Cable for RT MOTR.X Brushless Lens Motor (24")

This 24" Motor Cable from Teradek has a 4-pin straight-angle connector on each end. The flexible cable exits downward from the MOTR.X brushless lens motor for easy routing back to the receiver or daisy-chaining to another motor.

Teradek Monitor Bracket for CTRL.1/CTRL.3 Hand Controllers

This Monitor Bracket from Teradek is designed to mount the SmallHD FOCUS, CINE 7, or 703 Bolt monitor directly on the CTRL.1 or CTRL.3 hand controller.

Teradek White Disc for CTRL.1/CTRL.3 Controller

This White Disc from Teradek is designed to be used with the CTRL.1 or CTRL.3 controller. Use a dry-erase marker to clearly mark the disc. Permanent marker pens can also be used and cleaned with isopropyl alcohol.

Teradek Pre-Marked Focus Ring (10", Imperial)

This Pre-Marked Focus Ring from Teradek features imperial measurements and is designed for use with the CTRL.1 lens controller unit for automatic calibration and RT lens mapping. It supports a minimum focus distance of 10". The pre-marked ring saves calibration time when swapping out lenses.

• Auto-calibrate lenses to pre-marked focus rings

• Save time on set from manually calibrating after every lens swap

Teradek Pre-Marked Focus Ring (20", Imperial)

This Pre-Marked Focus Ring from Teradek features imperial measurements and is designed for use with the CTRL.1 lens controller unit for automatic calibration and RT lens mapping. It supports a minimum focus distance of 20". The pre-marked ring saves calibration time when swapping out lenses.

• Auto-calibrate lenses to pre-marked focus rings

• Save time on set from manually calibrating after every lens swap

Teradek Pre-Marked Focus Ring (3.5', Imperial)

This Pre-Marked Focus Ring from Teradek features imperial measurements and is designed for use with the CTRL.1 lens controller unit for automatic calibration and RT lens mapping. It supports a minimum focus distance of 3.5'. The pre-marked ring saves calibration time when swapping out lenses.

• Auto-calibrate lenses to pre-marked focus rings

• Save time on set from manually calibrating after every lens swap

Teradek Pre-Marked Focus Ring (6', Imperial)

This Pre-Marked Focus Ring from Teradek features imperial measurements and is designed for use with the CTRL.1 lens controller unit for automatic calibration and RT lens mapping. It supports a minimum focus distance of 6'. The pre-marked ring saves calibration time when swapping out lenses.

• Auto-calibrate lenses to pre-marked focus rings

• Save time on set from manually calibrating after every lens swap

Teradek Pre-Marked Focus Ring (10', Imperial)

This Pre-Marked Focus Ring from Teradek features imperial measurements and is designed for use with the CTRL.1 lens controller unit for automatic calibration and RT lens mapping. It supports a minimum focus distance of 10'. The pre-marked ring saves calibration time when swapping out lenses.

• Auto-calibrate lenses to pre-marked focus rings

• Save time on set from manually calibrating after every lens swap