Wooden Camera Core Accessory System for Canon C400 (Gold Mount)

The Wooden Camera Core Accessory System for Canon C400 (Gold Mount) comes with Arca-style baseplate and Arca-style riser, 2 dual left/right top plates, top handle cheese-type plate, NATO side rail, pro Gold mount battery slide with the Wooden Camera Core Accessory System for Canon C400.

The system provides tripod, shoulder pad, and bridge plate mounting options, lens support, multiple 1/4"-20 and 3/8"-16 accessory threads, and a NATO rail for mounting numerous accessory types. The battery slide mounts directly onto the back of the camera and can power the camera and accessories using a 4-pin XLR connector and three D-Tap outputs.

Wooden Camera Battery Slide for C300 Mark III and C500 Mark II (Gold Mount)

Add a professional high-capacity battery to power your Canon C300 Mark III or C500 Mark II cinema camera with this Gold mount Battery Slide from Wooden Camera. The battery slide mounts onto your camera using its captive screws and sits at an angle with a movable hinge to allow you to access the camera's BP-U battery.

The slide mounts a single Gold mount battery and powers the camera using a 4-pin XLR cable, which also provides hot-swap capability with the camera's internal battery. There are three D-Tap outputs around the battery plate to power a variety of other accessories.

Compatibility

Canon C300 Mark III and C500 Mark II cinema camerasGold mount battery

Wooden Camera Top Plate for Canon C400 (Left/Right)

This Top Plate from Wooden Camera is designed to mount onto the top of the Canon EOS C400 camera to add accessories and additional mounting options. The single plate is symmetrical and can flip upside down and install on either side of the camera top.

There are multiple 1/4"-20 and 3/8"-16 threads along the plate, and multiple 3/8"-16 threads on the front allow for front-mounted accessories, such as optional bolt-on rods and rod clamps. The separately available NATO side rail for the C400 can also be installed using the plate.

NOTE: If the operator wants to use the tape hook while the top plate is installed, they must remove the film plane tape hook and install it on the top plate for proper installation.

Wooden Camera Top Handle Cheese-Style Plate for Canon C400

Extend your original Canon EOS C400 top handle to mount additional accessories with this Top Handle Cheese-Style Plate from Wooden Camera. This plate mounts onto the top handle and provides 1/4"-20 and 3/8"-16 accessory threads; a front 3/8"-16 thread allows you to mount a bolt-on rod or rod clamp toward the front of the camera. The plate leaves access to the C400 hot shoe to mount the camera's microphone mount.

Wooden Camera NATO Side Rail for Canon C400

The NATO Side Rail from Wooden Camera attaches to the separately available Canon C400 top plate and provides a NATO rail for accessories such as handgrips. It also features 1/4"-20 and 3/8"-16 mounting threads along the length of the rail for alternative mounting options. The rail can be mounted horizontally or vertically for different configurations, and it features anti-twist safety pins to keep accessories mounted securely.