Zacuto C100 Mark II EVF Recoil Rig

$1,140.00
SKU
72407
MPN
Z-C1002ER-V2
  • Extend Canon Grip & Attach Gratical EVF
  • VCT Universal Baseplate
  • C100 Mark II Helmet
  • Zgrip Relocator
  • Supports C100 Mark II Handle Unit
  • Large Ergonomic Gel Polymer Shoulder Pad
  • 10" Track for Balance After Lens Swaps
  • Front 15mm Rod Adapter Set Far Back
  • Extra Space for Accessories and Balance
  • VCT14-Compatible V-Wedge

The Zacuto C100 Mark II EVF Recoil Rig is a shoulder rig that is compatible with the Canon C100 Mark II Camera, where you can also attach your Gratical EVF. When purchasing this rig, you will receive the Zacuto VCT Universal Baseplate, as well as the C100 Mark II Helmet, ideal for attaching additional accessories with the help of the Z-rail and threaded mounts, and the Zgrip Relocator. You will require a Zacuto Axis Mini in order to be able to attach your EVF to this rig. 

The VCT Universal Baseplate features a built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, and much more.

The Helmet Kit attaches directly on top of the C100 Mark II and offers 1/4"-20 threaded mounting holes, a slot for attaching the camera's Handle Unit, and a 15mm rod port for securing the optional Axis Mini for the EVF. It's also forward/backward adjustable along a 5" Z-rail.

The Zgrip Relocator has an integrated cable that connects to the camera and enables trigger or on/off control and lens aperture control. It also has a programmable function button for waveform, zebras, 1 to 1 zoom, menu, and more.

VCT Universal Baseplate

The Zacuto VCT Universal Baseplate features a built-in, curved shoulder pad, a V-lock plate, removable, 15mm LWS spring-loaded rod clamps with 1.6" of vertical adjustment, and rows of 1/4"-20 mounting threads along the sides for accessories. The contoured and cushioned shoulder cavity allows your camera to sit only three quarters of an inch above your shoulder, and you can mount the VCT Universal Baseplate to a tripod with a VCT14 QR plate. The shoulder pad is made of soft-gel polymer and a two-piece shoulder pad accounts for the natural slope in shoulder, and is designed to balance your camera on the operator's right shoulder only. The V-lock tripod connector also incorporates 1/4"-20 and 3/8"-16 threads for direct connection to your tripod quick release plate.

The spring-loaded rod clamps are set far back in the baseplate. This allows you to position your camera further back on the plate, thus keeping the balance point of your rig directly over your shoulder. The sliding track of the rod riser offers 0.87" of vertical adjustment. The riser can also be flipped to offer up to 1.57" of adjustment from the lowest point. The shoulder pad is set as far forward on the plate as possible in order to maximize your accessory capable rod area and help with balance. This baseplate is designed to provide balance and comfort for every camera.

  • Designed to work with virtually any camera
  • Enables you to go from hand held/shoulder shooting to tripod shooting without changing mounting plates
  • Attaches to any VCT14 QR tripod adapter system
  • Vertically adjustable 15mm LWS rod clamps with spring-loaded locking levers
  • Rear mounted screw thread sockets for 15mm rods following the Light Weight Rod Standard (LWS) of 60mm on-center distance between rods

C100 Mark II Helmet

The Zacuto C100 Mark II Helmet is compatible with the Canon C100 Mark II camera body. It attaches to the cop of the camera, which offers a sturdier connection point for the camera's top handle. Additionally, it gives you the ability to slide the handle forward and backward for balancing. When purchasing the Zacuto C100 Mark II Helmet, you will receive the helmet itself, along with a 5" Z-rail and a double-jawed Z-Rail lock. The lock allows for secure attachment of the top handle. 

The helmet attaches via one screw on top and one on the side, replacing the film plane screw on the left side of the camera. The Z-rail screws to the top of the Helmet and, in addition to the 5" rail, adds a 15mm rod port in the rear for mounting an optional Axis Mini or other 15mm rod accessory. For additional accessory mounting, the helmet features 1/4"-20 threaded holes on all sides.

Key Features

  • Helmet with 1/4"-20 accessory threads
  • 5" Z-rail with 15mm rod port
  • Double-sized Z-Rail jaws for secure attachment of C100 Mark II's top handle to the Z-rail
  • Enables forward and backward top handle position adjustment for balancing
  • Spring-loaded ratcheting levers for rod port and Z-rail jaws

Zgrip Relocator for Canon Cinema EOS C100/300/500 Cameras

The Zacuto Zgrip Relocator is a combination of the Grip Relocator for the Canon Cinema EOS C100/300/500 Cameras and Zgrip Z-Mount Zwivel 2. It comes with a 4.5" rod that is attached to one of the Zwivel 2's ports; the other port can be used to attach any 15mm rod. The ports can be rotated up to 365° using pin locking mechanism, allowing you to change the angle between the two 15mm rods at set points. In order to change the angle of the rods, you simply have to loosen either of the levers and the internal spring separates the ports for you to adjust them to the desired angle.

The Grip Relocator for the C100/300/500 Cameras features a 24" cable that connects to the port on your camera. Once it is plugged in, you get trigger or on/off control, lens aperture control, and a programmable function button that can be set to a number of things including waveform, 1-to-1 zoom, zebras, my menu, and many other functions. The removable grips that come with the C100/300 cameras attach directly to the Grip Relocator's handle.

Note: Removable grip for the Cinema EOS C500 Camera has to be purchased separately.

More Information
SKU 72407
Specifications

VCT Universal Baseplate

Material Shoulder Pad: Gel Polymer
Rod Type 15 mm
Rod Standard 15mm LWS
Vertical Adjustment 1.6" / 40 mm
Dimensions 13.5 x 4.25 x 1.75" / 34.3 x 10.8 x 4.4 cm (without rods)
Weight 2 lb / 0.9 kg (with rods)

Packaging Info

Box Dimensions (LxWxH) 10.8 x 7.4 x 4.7"

C100 Mark II Helmet

Accessory Mount Threads 1/4"-20
Rail Length 5" (12.7 cm)

Packaging Info

Box Dimensions (LxWxH) 1.7 x 1.3 x 0.3"

Zgrip Relocator for Canon Cinema EOS C100/300/500 Cameras

For Use with Canon Cinema EOS C100/300/500 Cameras
Rod Length 4.5" (11.4 cm)
Rod Support 15mm
Cable Length 24" (61 cm)
Weight 1.1 lb (0.5 kg)

Packaging Info

Box Dimensions (LxWxH) 10.0 x 8.0 x 1.0"

Related products

Check items to add to the cart or
Customer Reviews Copyright © 2018 Filmtools, a Magnasync/Moviola Company.