The RED DSMC2 Jetpack Expander is ideal for aerial, gimbal, and handheld applications. The expander provides standard connectors for power, CTRL, and SYNC for all your Timecode and Genlock needs. Custom-tailored supports and connectors for HDMI and USB power-out is also offered for low-profile setups and housings.
The DSMC2 Jetpack-SDI Expander also features a selector switch that enables the DSMC2 BRAIN® to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.
4.57 in. x 3.54 in. x 1.46 in. (116mm x 90mm x 37mm)
Weight
0.50 lbs (228.8 g)
Material
Magnesium
Brain Mounting
4x M4 captive mounting screws
Brain Connections
Power delivery via WEAPON Rear pogo connector (13-Pin) Communication via WEAPON Rear I/O connector (4×40 Pin)
Connectors
DC IN (6-Pin 1B LEMO socket) HDMI 1.2 output (Type A socket), 60 Hz max frame rate USB Power output (Type A socket), 1.0 A SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket) CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov