Financial Options Available
  • Affirm
  • Paypal Credit
Learn More
Requesting a Quote?
Looking for better pricing for an item? Create a new company account now togain access to quoting, quick ordering, and more. Learn more details here.
See an issue on this page? Let us know.

RED DSMC2 Jetpack-SDI Expander

0 reviews
Questions about this product?
  • Designed for aerial, gimbal, handheld applications
  • Connections for power, SDI, Ethernet, AUX, SYNC, CTRL
  • 3G-SDI connection provides remote monitor signal
  • Selector switch for auto boot power

The RED DSMC2 Jetpack-SDI Expander is ideal for low-proofile configurations that require 3G-SDI outputs or computer tethering. Designed for aerial, gimbal, and handheld applications, the expander provides a signal to a remote monitoring solution. With connnections for power, SDI, gigabit ethernet, AUX power, SYNC, and CTRL, the Jetpack offers increased bandwidth for streaming high-quality footage while remaining extremely versatile.

The DSMC2 Jetpack-SDI Expander also features a selector switch that enables the DSMC2 BRAIN® to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.

More Information
Product ConditonNew
Dimensions (H x W x D) 4.57 in. x 3.54 in. x 1.46 in.
(116mm x 90mm x 37mm)
Weight 0.56 lbs (253.6 g)
Material Magnesium
Brain Mounting 4x M4 captive mounting screws
Brain Connections Power delivery via WEAPON Rear pogo connector (13-Pin)
Communication via WEAPON Rear I/O connector (4×40 Pin)
Connectors DC IN (6-Pin 1B LEMO socket)
3G-SDI output (75 Ω BNC), 60 Hz max frame rate
Gigabit Ethernet input/output (9-Pin 0B LEMO)
Aux Power Output (2-Pin 0B LEMO), 1.5 A
SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
Auto Boot on Power 2-position slider switch
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature –20°C to 50°C (–4°F to 122°F)
Operating Humidity 0% to 85%, non-condensing
Storage Humidity 0% to 85%, non-condensing
Firmware Requirement Compatible with all DSMC2 firmware v6.3 or later
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Copyright © 2024 Filmtools, a Magnasync/Moviola Company.