Atomos Ninja Flame 7" 4K HDMI Recording Monitor

$795.00
SKU
63890
MPN
ATOMNJAFL2
  • 1920 x 1200 Touchscreen Display
  • 10-Bit FRC Monitor Processing
  • 4K HDMI Input/Output
  • 1500 cd/m² Brightness
  • HDR Mode with 10-Stop Dynamic Range
  • High Bright Mode for Rec. 709 Viewing
  • UHD 4K up to 30p / 1080p up to 120 fps
  • 10-Bit 4:2:2 ProRes & DNxHR Encoding
  • Records to 2.5" SSD/HDD Media
  • Dual Sony L-Series Battery Slots

The Atomos Ninja Flame 7" 4K HDMI Recording Monitor is a high-brightness on-camera recording monitor that sports a 7" screen and 1920 x 1200 resolution display. The monitor featurs an HDMI input to support clean output signals for 4K resolutions and can record to 2.5" SSDs using 10-bit, 4:2:2 Apple ProRes and Avid DNxHR codecs.

The 10-bit panel and AtomHDR display technology support a brightness range of over 10 stops, allowing you to more accurately monitor your log gamma footage without having to view flat, washed-out looking images, or use a LUT to compress the dynamic range and color space. The monitor offers built-in pre-sets to accurately translate popular log formats from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras. The settings only affect viewing, with recorded video remaining unaltered.
In addition to HDR monitoring, the monitor also offers a High Bright mode for traditional Rec. 709 monitoring. This mode takes advantage of the full 1500 cd/m² brightness to allow for more confident monitoring in bright outdoor environments, even without a sun hood. In HDR mode, use of an included snap-on sun hood is required, as displaying a wider brightness range reduces the overall brightness of the monitor.


Built to withstand the rigors of production, the Ninja Flame features built-in protective armor with silicone-covered corners and chamfered edges. Compared to the original Ninja, the Flame now features dual Sony L-Series battery plates that support battery hot-swapping, enabling longer run times. For audio recording, the monitor features a 3.5mm microphone input, with on-screen audio level display. Additionally, the monitor features a variety of on-screen exposure analysis, framing, and focus assist tools. Included with the basic kit are a Master Caddy II 2.5" drive enclosure and an AC adapter power supply. A travel case for storing the monitor is also included to protect it during storage and transport.

Monitor

  • 1920 x 1200 resolution
  • 10-bit FRC monitoring processing
  • 1500 cd/m² brightness
  • 4K HDMI input/output
  • AtomHDR technology displays 10 stops of dynamic range to natively display HDR (log) footage
  • Presets for viewing log gamma curves from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras
  • High Bright mode for Rec. 709 viewing
  • UHD 4K downscale for HD monitoring
  • Supports custom 3D LUTs (.cube format)
  • Anamorphic de-squeeze: 2x, 1.5x, 1.33x, Panasonic 8:3

Recording

  • UHD 4K recording at 24/25/30 fps
  • 1080p recording up to 120 fps
  • 10-bit 4:2:2 ProRes and DNxHR recording to SSD/HDD media
  • Pre-roll record (HD 8 seconds, 4K 2 seconds)
  • Custom time-lapse mode
  • 10 metadata fields
  • Additional Features
  • 3.5mm microphone input
  • Audio level meters and mic level adjustment
  • Dual Sony L-Series type battery slots support hot-swappable for continuous power
  • Built-in armor with silicone-covered corners
More Information
SKU 63890
Specifications

Display

Type 7.1" IPS capacitive touchscreen
Resolution  1920 x 1200
325 ppi 
Bit Depth  10-bit 
Video Aspect Ratio  Native: 16:9 
Brightness  1500 cd/m
LUT Support  3D Lut

Interface

Inputs 1 x HDMI (1.4b)
1 x 2.5 mm LANC
1 x 3.5 mm stereo mini-jack (Mic / Line)  
Outputs  1 x HDMI (1.4b) loop-through output
1 x 3.5 mm headphone jack

Supported Video Format

Supported Signal Input: 10 / 8-bit 4:2:2 (dependent on video source)
Output: 10 / 8-bit 4:2:2 (dependent on video source)  
Input/Output Resolutions  2160p 24/25/30
1080p 24/25/30/50/60/120
1080i 50/60
720p 50/60
Encoding Formats  UHD 4K (3840 x 2160):
Apple ProRes HQ, 422, LT
DNxHR HQX, HQ, SQ, LB
1920 x 1080:
Apple ProRes HQ, 422, LT
DNxHD 220x, 220, 145, 36
Pulldown Conversion  24/25/30PsF to 24/25/30p (2:2 pulldown)
60i to 24p (3:2 pulldown)

Audio Input/Output

HDMI 2 or 8-channel, 24-bit 
Audio Input  3.5mm, 2-channel, 48 kHz, 24-bit 
Audio Output  3.5mm headphone jack 

Remote Operation

HDMI Auto HDMI trigger
Supported Protocols: Canon, Sony, Atomos Open Standard  
LANC  Supports slave configuration

Recording Operation

Supported Media  4K:
2.5" SSD
HD High Frame Rate (50/60/120p):
2.5" SSD
2.5" HDD (7200 rpm and up) for 1080p 50/60
HD (30p and Less):
2.5" SSD
2.5" HDD (5400 rpm and up)

Note: Only use media that has been approved by Atomos  
Master Caddy Dock  Interface: 2.5" SATA to USB 2.0/3.0
Supported Applications  Final Cut Pro X/7+
Avid Media Composer 5.0+
Adobe Premiere 5.5+
Grass Valley EDIUS 6.0+
Sony Vegas Pro 10+
Lightworks
Autodesk Smoke 2015
XML Support  FCPX XML native
Customer Reviews Copyright © 2019 Filmtools, a Magnasync/Moviola Company.