Rhino Camera Gear Ultimate Slider Bundle with Soft Shell Case Camera Tripod Base

The Rhino Camera Gear Ultimate Slider Bundle with Soft Shell Case Camera Tripod Base features the 42" stainless steel Slider Pro and the ARC II motorized head that attaches to the slider. The ARC II Rhino Camera Gear Ultimate Slider Bundle adds pan/tilt motion and additionally lets you mount focus and slider motor add-ons, which are also included. With everything attached to the slider and ARC II, you can achieve precision 4-axis motion control with keyframed movements and rack focus.

The Rhino Camera Gear Ultimate Slider Bundle attaches to the ARC II via a 15mm rod and lets you control focus during production. A high-speed slider motor is enclosed for horizontal slides and a high-torque motor is for incline and vertical shots. The Bundle with Soft Shell Case Camera Tripod Base also comes with interchangeable 24" carbon fiber rails that you can switch in should you want a more compact setup.

Rhino Camera Gear Slider Pro (42")

The 42" Pro Slider from Rhino Camera Gear is an ultra-rigid, modular camera slider that supports loads up to 30 lb. This stainless steel slider is even more rigid than the previous version and uses an oversized knob to mount quickly and easily on your tripod, no slider spinning required. Use the Pro Slider with separately available components like the Flywheel for smooth manual slides, the High-Torque Motor for vertical motion, or the Arc II motion control unit. Optional carbon fiber rails are available to support various rig configurations.

The Rhino Pro Slider features all-terrain legs for leveling on almost any surface and a 3/8"-16 carriage screw for mounting your camera or ball head. This 42" slider incorporates a center and two end Tripod Quick Mounts. Vertical travel is enhanced by a newly designed end plate with a press-fit pulley mount that eliminates slippage.

Key Features

• 42" stainless steel rails
• Easy-to-use center and two end Tripod Quick Mounts
• Increased rigidity from previous version
• Interchangeable with separately available rails
• Supports loads up to 30 lb
• New end-plate design for smooth vertical moves
• Use with optional Flywheel, High-Torque Motor, and/or Arc II motion controller
• Camera carriage with 3/8"-16 screw
• Integrated carriage brake
• 3/8"-16 and 1/4"-20 mounting threads
• Folding all-terrain legs

Rhino Camera Gear Arc II 4-Axis Motorized Pan/Tilt Head

Perform smooth, precise, quiet camera moves automatically with this Arc II 4-Axis Motorized Pan/Tilt Head from Rhino Camera Gear. The base Arc II can perform pan and tilt operations, and optional slider and focus options are available separately, making it capable of full 4D operations. It mounts a camera with/or fluid head using its Manfrotto 501-type quick release plate and 1/4"-20 and 3/8"-16 screw options. The head can support a cinema camera rig up to 15 lb in weight, and its motors are ultraquiet. Powerful Arc II features include time-lapse, light-lapse mode that performs night-to-day time-lapse, facial tracking, keyframe presets, and camera power options. The head integrates seamlessly with Rhino sliders so setup with another axis is a breeze. You can control the modes and movement of the Arc II using the integrated joysticks, or you can utilize wireless iOS control with an Arc II control app. Power the Arc II, it features internal 4400mAh lithium-ion batteries that are charged using the included international charger kit. It also features a power-saving mode and automatically shuts down when it's not used for 15 minutes. It can operate via an optional slider at up to a 90° angle with up to 5 to 15 lb rig weight and a separately available high-torque motor.

Key Features

Up to 4-axis head with pan and tilt built-in; slide and focus are optional

15 lb load capacity

Ultraquiet motor operation

Real-time control of Arc II using iOS via wireless or by using the onboard joysticks

Presets using keyframes for creating repeatable shots

Can be used vertically with an optional high-torque motor

Manfrotto 501-type quick release camera plate with 1/4"-20 and 3/8"-16 mounting screws

One 3/8"-16 mounting thread on the bottom

Powers using built-in lithium-ion batteries and charges with included 2.1mm barrel adapter and international charging kit

Powers down after 15 minutes of idle time to save battery life

Automatic face tracking technology

Time-lapse with night-to-day light-lapse feature

Power your camera using Arc II power with an optional cable

Easy to set up and fully compatible with Rhino Gear tripods and slider

Rhino Camera Gear Focus for Arc II

The Focus for Arc II from Rhino Camera Gear enables you to add precision focus moves to your Arc II motion control shots. Suitable for both slider and tripod use, the Rhino Focus works by shifting focus automatically between your two chosen keyframes.

This focus system features a cine-standard 0.8 MOD gear and mounts via its 15mm carbon fiber rod. It also includes an adjustable rubber lens gear and a power cable.

Rhino Camera Gear High Speed Slider Motor

Outfit your camera slider for high-speed shots with this High Speed Slider Motor from Rhino. This high-speed motor can attach to any Rhino slider and can connect to the Arc II for camera automation. The low-profile motor can move a 5 lb load at a 20° angle and can move at 5" per second. Both 24 and 42" motor cables are included with the motor.

Rhino Camera Gear High Torque Slider Motor

Outfit your camera slider for vertical-torque shots with this High Torque Slider Motor from Rhino. This high-torque motor can attach to any Rhino slider and can connect to the Arc II for camera automation. The low-profile motor can move a 10 lb load at a 90° angle and can move at 1" per second. Both 24 and 42" motor cables are included with the motor.

Rhino Camera Gear Interchangeable Carbon Slider Rails (24")

This pair of Interchangeable Carbon Slider Rails from Rhino Camera Gear enables you to easily change the length and load capacity of your Rhino slider. The 24" lightweight rails are constructed of precision-ground carbon fiber and are ultra-rigid, supporting up to 15 lb. A center Tripod Quick Mount enable you to quickly mount the rails.

Features

• 24" lightweight carbon fiber rails
• Easy-to-use Tripod Quick Mount in the center
• Supports loads up to 15 lb

Rhino Camera Gear Slider EVO Carrying Case (42")

Store and protect your 42" EVO camera slider with the Rhino Slider EVO Carrying Case. To facilitate fast setups in the field, the case fits a completely assembled slider, including an attached Rhino Motion, Rhino Arc, and even a fluid head thanks to an expandable "pop top" design. A soft interior lining helps protect the slider from scratches while retaining straps keep the slider secured in place.

Key Features

• Protects your 42" Rhino Slider EVO
• Expandable pop-top lets you keep your fluid head attached
• Retaining straps keep your slider in place
• Storage for extra 24" EVO rails