The Easyrig Minimax STABIL Light Gimbal/Camera Support Arm System is designed with the DLSR/mirrorless shooter that uses a motorized gimbal is the perfect setup for stable shooting. The Easyrig STABIL Light Gimbal Support Arm System was developed to support gimbals between 2-7kg (4.4-15.4 lbs). It will help stabilize handheld shots to a certain degree while protecting your back. This Easyrig Gimbal/Camera Support Arm System enables you to operate the gimbal and camera for much longer periods of time. It can be locked in 90 degrees to function as a ‘normal’ Minimax upper arm.
This upgraded Minimax model features a redesigned spring system to accommodate the STABIL Light, which results in smoother support rope movement specifically designed for the 4.4 to 15.4 lb payload range. You can adjust the tension of the STABIL Light flexible support arm to match the weight of your gimbal/camera combination, and you can also lock the support arm so it behaves like the original Minmax arm.
Compatibility
You can use this with gimbal/camera systems weighing between 4.4 to 15.4 lb
Setup
Use gimbals directly with the STABIL Light, or use your gimbal mounted on an optional two-hand ring or with the optional Easyrig Easy tilt Bar, which allows you to tilt and easily pan your gimbal
Use
Use this system to smooth out shots when walking or running with a supported gimbal/camera setup
Adjustment
You can adjust the spring tension in the STABIL Light arm to tune it to match your gimbal/camera setup; if you want to eliminate the vibration compensation, you can lock the arm
In the Box
Easyrig Minimax STABIL Light Gimbal/Camera Support System
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.