HIVE LIGHTING Wasp 1000 Plasma PAR Light with Remote Ballast Kit - 220V

$8,999.00
SKU
98668
MPN
HIVE-WPP1K-KIT-220-RB
  • Wasp 1000 Head with 1000W Plasma Bulb
  • 12-Degree Parabolic Reflector
  • 220V Remote Ballast/Power Supply
  • 4-Piece HDP Lens Set
  • 4-Leaf Barndoor Set
  • 5-Piece Scrim Set
  • Accessory Mounting Ring
  • 32' Header Cable
  • 6500K Color Temperature, 98 CRI

The HIVE LIGHTING Wasp 1000 Plasma PAR Light with Remote Ballast Kit - 220V was intricately designed for creatives who need a great deal of light backed by a collection of modifiers. The Wasp 1000 creates a lighter weight unit by removing the power supply from the head. This results in an easily supported light when mounted at taller heights that connects to the remote ballast via its 32' header cable.

The kit includes the Wasp head with a 1000W plasma bulb, a 12-Degree Spot Reflector, accessory ring, 4-way barndoors, a 5-piece scrim set, a 4-piece HDP Lens Set for varying the light's beam spread, a 32' Header Cable, and a 220V Remote Ballast.

The Wasp 1000 Plasma Head is a single point light source with performance similar to an 1800 to 2500W HMI (or 5000W tungsten fixture), but unlike an HMI it has an extremely low power draw. While the HMI consumes 2.5K of current, the Wasp uses just 150W, which means you can run 2 of them on a 20A, 120 VAC circuit. And performance isn't limited to power. The daylight-balanced Wasp outputs full spectrum, 98 CRI dimmable light at 6500K that's flicker-free at any frame rate, making it ideal for high-speed work. Ideal for long throw work, at 50' the Wasp 1000 reads f16 at spot and f4/5.6 at flood with an ISO of 800. The light has a combination 5/8" receiver / 1-1/8" pin mount.

More Information
SKU 98668
Specifications
Light Source 1000 W Plasma bulb
Lamp Life 50,000 Hours
Equivalent Light Output Approximate Equivalence: 1800-2500 W HMI / 5000 W tungsten
Color Temperature 6500K
CRI 98
Dimming Yes
Power Consumption 150 W
Photometrics With 12° Reflector
7000 fc / 75,348 lux @ 10' / 3.0 m
1120 fc / 12,056 lux @ 20' / 6.1 m
280 fc / 3014 lux @ 30' / 9.1 m
70 fc / 753 lux @ 40' / 12.2 m
Voltage 220 VAC
Mounting 5/8" / 16 mm) Receiver / 1-1/8" / 28 mm pin combo
Dimensions 19 x 18 x 17" / 48.3 x 45.7 x 43.2 cm including reflector
Weight Not specified by manufacturer

Related products

Check items to add to the cart or
Customer Reviews
Copyright © 2019 Filmtools, a Magnasync/Moviola Company.