IFBlue IFBR1C Bodypack IFB Monitoring Receiver for Lectrosonics (A1: 470 to 537 MHz) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The IFBlue IFBR1C BodypackReceiver for Lectrosonics receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. In spite of its tiny size, the new IFBR1C receiver offers excellent performance on par with all of Lectrosonics’ IFB products. The design uses +/-20 kHz FM deviation for efficient use of the bandwidth, with compandor noise reduction circuitry for an excellent signal to noise ratio. A supersonic Pilot Tone signal controls the audio output squelch to keep the receiver silent when no transmitter signal is received.
Reliable, Professional Performance
The IFBR1C uses ±20 kHz FM deviation for efficient use of the bandwidth. The compandor noise-reduction circuitry delivers an excellent signal-to-noise ratio. A supersonic Pilot Tone signal controls the audio output squelch to keep the receiver silent when no transmitter signal is received. The incoming RF signal is filtered and amplified, then mixed down to the IF frequency using a microprocessor-controlled synthesizer.
The receiver's high-sensitivity design provides extended operating range both indoors and outdoors.
One-Knob Operation for Simplicity of Use
The IFBR1C provides simple, one-knob operation for on/off and audio level, and easy, on-the-fly programming with fast frequency adjustments. Basic operation is simply a matter of rotating the knob to turn power on and adjust the volume level.
On the side panel, membrane switches and a backlit LCD interface let you quickly select frequencies and save/recall presets.
10 Frequency Presets
There are 10 presets available for programming the IFBR1C. The stored frequencies remain in memory during power Off and even with the battery removed. Use the Up and Down arrows to scroll through the previously selected frequencies stored in the IFBR1C and quickly change frequencies for quick communication.
Side contacts allow for recharging the NiMh batteries without removing them from the the IFBR1C requires the optional CHSIFBR1C battery charging station (works with NiMh batteries only).
In the Box
IFBlue IFBR1C Bodypack IFB Receiver (A1: 470 to 537 MHz)
Lectrosonics IFBT4 Lectrosonics Any Digital Hybrid Wireless Transmitter
Features & Functions
Battery Life: 10 Hours (Alkaline), 12 Hours (NiMh, Included), 20 Hours and 40 Minutes (Lithium) Indicators: Multicolor LED Indicator for Power On and Battery Status
Controls Top Panel: Single-Knob to Control Audio-Output Level and Power On Controls Side Panel: Membrane Switches with Backlit LCD Interface for Frequency Selection and Preset Function
Inputs / Outputs
USB I/O
1 x Micro-USB Female Input
Audio I/O
1 x 1/8" / 3.5 mm TRS Headphone Output
Headphone
Audio Output: 1 VRMS into 50 Ohms Minimum Headphone Impedance: 16 to 600 Ohms
Wireless
Receiver
Channels: Single-Channel (Mono) Operating Frequencies: A1: 470 to 537 MHz Frequency Selection Steps: 25 kHz Sensitivity: 1 uv (20 dB SINAD) Signal to Noise Ratio: 95 dB A-Weighted Squelch Quieting: 90 dB Spurious Rejection: Greater than 70 dB Frequency Response: 100 Hz to 10 kHz, (±1 dB) Antenna:Headphone Cable
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.