- Paypal Credit
Light & Motion Seca 2200 Drone LED
- Regulated 2200 Lumen Output
- Four LED Array with LEDs by CREE
- Flicker-Free Firmware Design
- 2-Cell External Battery
- Custom Engineered Reflector/Optics
- GoPro Mount
The Light & Motion Stella 1000 SP LED 1-Light Action Kit with Accessories is a lighting kit that includes a Stella 100 LED light, pistol grip, and a set of barndoors. To add onto this kit, there is a cold shoe and tripod mounting kiit, small ball head with a 1/4"-20 mounting screw, boom arm, and camera insert bag. The output to 5000K with a rate of 90 CRI and 90 TLCI. The light has a flicker free design a 120° beam angle, and waterproof to a depth of 328'.
The custom-designed pistol grip allows you to comfortably hold the light, and the set of 4-leaf barndoors provides control of the light's spill and enables easy mounting of gels and diffusion. The included cold shoe and tripod mounting kit expand the mounting options of the Stella 1000, and the ball head adapter enables you to mount the light and orient it to a specific angle. The handheld boom arm extends from just over two feet, to just over five feet so you can extend your reach with the light. The camera insert bag holds the kit (except the boom arm) and keeps it packed together, while stored in a non-padded bag.
Stella 1000 LED Light
The Stella 1000 LED Light from Light & Motion is a daylight-balanced LED source that packs enough features to cause many users to call it their ideal on-camera source. For location work, the Stella 1000 is hard to beat. With a very small form factor and weight of only 0.6 lb, it's barely noticeable in your kit case. What is noticeable is the clean, accurate color rendering output from the unit's flicker-free COB LED that gives it a rating of 90 CRI and 90 TLCI.
The Stella 1000 has a wide 120 degree beam that can be narrowed with the included 25-degree optical Fresnel lens or softened with the diffuser. The fan-less design is dead quiet for sound-sensitive locations and is dimmable either continuously or in steps. And, the housing is durably built. Not only can it survive repeated dropping on concrete from a height of 3.3', but it's also waterproof to depths of 328 feet!
The unit is powered by a built-in battery that charges in 1.0 hr. to 80% and 1.75 hr. to full charge, giving you a run time of 90 to 700 minutes depending on the power selected. You can also run the light from a D-Tap external battery source for longer shoots. Additionally, you can use mains power anywhere in the world thanks to the inclusion of a multi-voltage AC power supply. The Stella 1000 also comes with an external AC power supply and a 1/4"-20 adapter.
- High output Chip on Board (COB) LED
- Certified 90 CRI and 90 TLCI, CCT 5000 Kelvin
- Integrated, rechargeable, Li-ion battery provides 90 to 700 minutes of cord-free operation
- Flicker-free firmware design
- Regulated lumen output - does not fade during use
- Dimming with continuous or stepped control
- Fan-free thermal management for silent operation
- Wide 120° beam angle
- Broad range of accessories including Profoto and Chimera adaptability
- Colored LED indicators give accurate battery status
- Runs off wall power or D-Tap, 12V, external battery kit
- Fast charge of 1.0 hr. to 80% and 1.75 hr. to full charge
- Certified performance (FL-1 standard)
.Pistol Grip Light Handle For Stella 1000 and 2000
The Pistol Grip Light Handle from Light and Motion is for the Stella 1000 and Stella 2000 lights, and allows the light to be hand-held in a comfortable upright position. It includes a lanyard to securely tether around your wrist.
Light Modifier Kit for Stella 2000 & All Stella Pro Lights
The Light Modifier Kit for Stella 2000 and All Stella Pro Lights from Light & Motion gives you three ways to alter or manipulate the quality and spread of light coming from these fixtures. The kit includes a 25° Fresnel Lens to narrow and focus the light output and a Speed Ring Gel Holder to mount softboxes or 3x3" filters. The kit also includes a Glo Bulb to mount your light overhead, above your subjects in situations like round table discussions or interviews.
C-Stand Mount for Stella LED Lights
This C-Stand Mount for Stella LED Lights from Light and Motion allows you to mount your Stella 1000, 2000, or Pro 5000 fixture to a C-Stand or other 5/8" stud. The sturdy mount has a thumbscrew for rapid attachment.
BYOB 9 Camera Insert Gray
The gray BYOB 9 Camera Insert from Tenba is designed to carry and protect a camera and gear inside other non-camera bags including larger backpacks, suitcases or handbags. Its soft outer shell molds to the shape of a variety of carry bags. The gray BYOB 9 will hold a mirrorless camera or compact DSLR with 2-3 lenses and accessories. Padded interior dividers are adjustable to fit multiple configurations and soft brushed tricot lining does not scratch your equipment. The insert features a zippered top cover that can be folded back and stowed to allow easy access to your gear and a handle for carrying and quick removal of the insert. Stretchy mesh pockets provide a place to store mobile phones, camera and lens accessories or other items and zippered interior pockets can secure smaller more valuable items. In addition there are front and rear pockets for additional acessories and a D-ring to attach keys, a carabiner or tethered media wallet.
EL Handheld Boom Arm (25-61")
The Elinchrom EL Handheld Boom Arm (25-61") has a rubberized handgrip and can be used to extend lights up to 5.1' (156 cm). This is a more precise, flexible way to position lighting gear (even with umbrellas or softboxes) than placing it on stands, and it takes up less floor space as well. The two sections of the EL-Boom Arm can be quickly adjusted with the clip-locks. The standard spigot mount fits Elinchrom flash heads and the Ranger Quadra heads. The arm will hold approximately 4.4 lb (2 kg).
- Minimum length: two sections, 24" (63 cm) each
- Rubberized handgrip
- Profiled aluminum tubes
- Standard spigot for EL-Flashheads and the Ranger Quadra heads
- Maximum extension: 5.1' (156 cm)
|Brands||Light & Motion|