Miller CX18 Sprinter II 2-Stage Alloy Tripod System with Mid-Level Spreader

$5,003.37
SKU
99263
MPN
3777
  • CX18 100mm Fluid Head, 35 lb Payload
  • 1580 Sprinter II 2-Stage Alloy Tripod
  • Continuous Variable Adjustment Spreader
  • 16mm Fixed-Length Pan Handle
  • Rubber Foot Pads
  • Arrowx 2-Stage Soft Case
  • 15+0 Steps of Counterbalance
  • 5+0 Steps of Pan and Tilt Drag
  • 17.3 to 60.4" Working Height
  • High-Speed Independent Dual Leg Locks

The Miller CX18 Sprinter II 2-Stage Alloy Tripod System with Mid-Level Spreader is the flexible solution compatible with even the most compact and lightweight cameras. The Miller CX18 provides the stability of a 100mm ball base fluid head and a mid-level spreader with continuously variable adjustment. The CX18 fluid head supports up to 35 lb payloads and offers 15+0 steps of counterbalance and 5+0 steps of pan and tilt drag. The 1580 Sprinter II 2-stage aluminum tripod legs feature three leg sections, adjustable between 17.3 to 60.4" of working height. The system is complete with a pan handle and soft carry case.

CX18 Fluid Head

The Miller CX18 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to support camera setups up to 35.2 pounds, adequate for a fully rigged cinema camera or a full-sized ENG camcorder. Securing your camera or rig is easy. The sideload plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 2.4" of sliding range to balance your rig.

To survive fast-paced shooting environments, the CX18 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball-bearings for smooth mechanical operation. Even in harsh conditions, the CX18 will perform reliably. The base of the CX18 is a 100mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CX18 in dark environments. A telescoping pan handle is included, and a second rosette is available for attaching an optional second pan handle.

Sprinter II 2-Stage Alloy Tripod (Mid-Level Spreader Ready)

The Miller Sprinter II 2-Stage Alloy Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. Unlike many traditional multi-stage designs, both flip-locks are located on the same section for easy reaching, no matter the height setting. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.

993 Mid-Level Spreader

The Miller 993 is a mid-level spreader for Sprinter, Arrow 25/40 HD tripod systems. This device offers variable adjustment in minimum and maximum height settings and a latch and swivel design.

475 Rubber Feet Pads for Select Tripods (Set of 3)

The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid-level spreader.

Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)

Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.

More Information
SKU 99263
Specifications

CX18 Fluid Head

Camera Plate
Camera Plate Features Sliding Balance Plate
Balance Plate Sliding Range 2.4" / 6 cm

Tripod Platform
Base Mount 100 mm Half Ball

Pan & Tilt
Drag Control Pan: 5-Step Plus 0
Tilt: 5-Step Plus 0
Vertical Tilt +90° to -75°

Physical
Load Capacity 0 to 35.2 lb / 0 to 16 kg
Counter Balance Incremental 15-Step Plus 0
Dimensions 6" / 15 cm
Weight 5.7 lb / 2.6 kg

Packaging Info
Box Dimensions (LxWxH) 17.9 x 12.6 x 12.3"

Sprinter II 2-Stage Alloy (Mid-Level Spreader Ready)

 
General
Head Mount Type 100 mm Bowl
Load Capacity 100 lb / 45 kg
Maximum Working Height 60.4" / 153 cm
Minimum Working Height 17.3" / 44 cm
Folded Length 27.6" / 70 cm
Materials Aluminum
Weight 8.3 lb / 3.8 kg

Legs
Leg Sections 2

993 Mid-Level Spreader

Construction Alloy
Type Mid-Level
Adjustable Continuously variable through all height settings
Minimum Length 12.4" (315mm)
Maximum Length 20.3" (515mm)
Weight 1.7 lbs (0.75kg)

Packaging Info
Box Dimensions (LxWxH) 18.35 x 6.55 x 6.4"

 475 Rubber Feet Pads for Select Tripods (Set of 3)

Dimensions L: 3.7" / L: 5.0 mm
Weight 8 oz / 210 g
Packaging Info
Box Dimensions (LxWxH) 7.5 x 5.6 x 5.4"

Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)

Material Ballistic nylon outer shell
Type of Closure Zipper
Padded Yes
Carrying/Transport Options Dual top handles and padded end handle
D-links for optional, user-supplied shoulder strap
Back pack straps
Dimensions 37.8 x 10.2 x 12.6" / 96.0 x 26.0 x 32.0 cm
Weight 9.7 lb / 4.4 kg

Packaging Info
Box Dimensions (LxWxH) 39.0 x 13.75 x 12.0"

Related products

Check items to add to the cart or
Customer Reviews
Copyright © 2019 Filmtools, a Magnasync/Moviola Company.