Miller CX2 Fluid Head with Toggle 75 2-Stage Alloy Tripod System (Mid-Level Spreader)

$2,238.03
SKU
99232
MPN
3705
  • CX2 Fluid Head with Sideload Plate
  • 0-17.6 lb Load Capacity
  • For Camcorders, DSLRs & Mirrorless
  • 16-Step Counterbalance
  • Toggle 75 Tripod Legs
  • 15.4-61.4" Height Range

The Miller CX2 Fluid Head with Toggle 75 2-Stage Alloy Tripod System is a production-ready tripod designed for light loads and quick setups. The Miller CX2 is perfect with DSLRs, mirrorless cameras, and camcorders and supports loads up to 17.6 lbs. Features also include 16 steps of counterbalance and two-stage toggle legs with a mid-level spreader.

For more information on the Miller CX2 Tripod System, check out the descriptions and features below:

Fluid Head

The Miller CX2 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to support camera setups up to 17.6 pounds, adequate for a rigged up DSLR or mirrorless camera, a smaller cinema camera, or a small ENG camcorder. Securing your camera or rig is easy. The sideload plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 2.4" of sliding range to balance your rig.

To survive fast-paced shooting environments, the CX2 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball-bearings for smooth mechanical operation. Even in harsh conditions, the CX2 will perform reliably. The base of the CX2 is a 75mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CX2 in dark environments. A fixed length pan handle is included, and a second rosette is available for attaching an optional second pan handle.

Toggle 75 2-Stage Alloy Tripod (Mid-Level Spreader Ready)

The Miller Toggle 2-Stage Alloy Tripod is designed to be a compact yet sturdy platform for your 75mm ball-base fluid head. The 2-stage design allows for a large 15.4 to 61.4" height range while maintaining a compact folded length of 27". Each stage features its own rotary clamp for secure locking, enabling support for payloads up to 55 pounds. Compatible spreaders, rubber feet, and dollies are available separately.

Pan Handle for Compass15 and Compass20 Fluid Heads

The Miller Pan Handle for Compass15 and Compass20 Fluid Heads is a 16mm fixed-length pan arm. The main tube is black-anodized aluminum alloy and features a comfortable rubber grip.

550 Rubber Feet Pads for Select Tripods (Set of 3)

The 550 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods featuring 835 and 508 above ground spreaders.

508 Telescopic Above Ground Spreader

The miller 508 Telescopic Above Ground Spreader is designed for use with the 402 and 420 2-stage tripods, and allows you to stably setup the tripods on uneven terrains, steps, and slopes. Made of alloy tubes, the sturdy spreader offers durability. The spreader allows you to instantly setup your tripod, holding individual legs at an equal or preset distance. Telescoping spreader arms enable you to further spread the legs hence you don't have to detach the spreader from your tripod for a large area setup.

  • Designed for use with the 402 and 420 2-stage tripods
  • Attaches to the center bracket of a tripod
  • Allows you to stably setup the tripods on uneven terrains, steps, and slopes
  • Alloy tubes ensure durability
  • Allows you to instantly setup your tripod, and holds individual legs at an equal or prest distance
  • Telescoping spreader arms enable you to further spread the legs hence you don't have to detach the spreader from your tripod for a large area setup

554 HD Shoulder Strap

The Miller 554 HD Shoulder Strap is a tripod carry strap designed for the Miller Sprinter series tripods. It is a 2 inch wide strap that works with folded tripods from 25" to 36" and has a 3" long shoulder pad.

  • 2 inch wide tripod carry strap
  • 3" long shoulder pad

Compatible with:

  • Miller Sprinter tripods
  • Sachtler Hot Pods and other models with a key ring to attach a strap
  • Any tripod 25" to 36" long with a key ring to attach a strap

Softcase for 2-Stage Toggle 2 Tripod Systems (Black)

Store, transport, and protect your tripod or other gear with the black Miller Softcase for 2-Stage Toggle 2 Tripod Systems. This sturdy case is constructed from Cordura nylon and high-density foam, with a brushed polyester interior. The triangular shape promotes a secure fit, and the dual zippers and wide opening provide easy access. Carry the case with the dual strap handles or attach an optional, user-supplied shoulder strap to the D-links. Users will appreciate the external pocket and card holder.

More Information
SKU 99232
Specifications

CX2 Fluid Head



Camera Plate
Camera Plate Features Sliding Balance Plate
Balance Plate Sliding Range 2.4" / 6 cm

Tripod Platform
Base Mount 75 mm Half Ball

Pan & Tilt
Drag Control Pan: 3-Step Plus 0
Tilt: 3-Step Plus 0
Vertical Tilt +90° to -75°

Physical
Load Capacity 0 to 17.6 lb / 0 to 8 kg
Counter Balance Incremental 15-Step Plus 0
Dimensions 6.6" / 16.7 cm
Weight 4.9 lb / 2.2 kg

Packaging Info
Box Dimensions (LxWxH) 18.0 x 12.6 x 12.3"

 

Toggle 75 2-Stage Alloy Tripod (Mid-Level Spreader Ready)

General
Head Mount Type 75 mm Bowl
Load Capacity 55 lb / 25 kg
Maximum Working Height 61.4" / 156 cm
Minimum Working Height 15.4" / 39 cm
Folded Length 27.2" / 69 cm
Materials Aluminum
Weight 6.6 lb / 3 kg

Legs
Leg Sections 3

 

Pan Handle for Compass15 and Compass20 Fluid Heads

Material Anodized aluminum alloy and rubber
Length 15.4" (39.0 cm)
Weight 0.6 lbs (285 g)

Packaging Info
Box Dimensions (LxWxH) 15.75 x 3.0 x 2.15"

550 Rubber Feet Pads for Select Tripods (Set of 3)

Dimensions 2.7" (70mm)
Weight 8 oz (210 g)


Packaging Info
Box Dimensions (LxWxH) 7.2 x 5.55 x 5.4"

508 Telescopic Above Ground Spreader

Tripod Attachment Pin & Eyelet
Folded Length 12.8" (325 mm)
Extended Length 20.7" (525 mm)
Construction Alloy Tube
Weight 0.9 lb (400 g)



Packaging Info
Box Dimensions (LxWxH) 14.15 x 3.45 x 3.25"

 

554 HD Shoulder Strap

Material Not specified
Exterior Dimensions 2 x 29 x 40" (5 x 73.7 x 101.6 cm) (WxL)
Accommodates Miller Sprinter tripods 
Any tripod 25" to 36" long with a key ring to attach a strap

Packaging Info
Box Dimensions (LxWxH) 5.0 x 3.7 x 1.1"

 

Softcase for 2-Stage Toggle 2 Tripod Systems (Black)

Material Cordura nylon exterior, high-density foam padding, and brushed polyester interior
Type of Closure Zipper
Padded Yes
Carrying/Transport Options Dual, top strap handles
Interior Dimensions 36.6 x 10.2 x 9.5" / 93.0 x 26.0 x 24.0 cm
Weight 2.7 lb / 1.2 kg

Packaging Info
Box Dimensions (LxWxH) 38.5 x 10.0 x 10.0"

Related products

Check items to add to the cart or
Customer Reviews
Copyright © 2019 Filmtools, a Magnasync/Moviola Company.