Miller DS-10 DV Fluid Head and Solo Aluminum Tripod

$1,190.70
SKU
99153
MPN
1640
  • Supports 11 lb
  • Selectable Counterbalance
  • Fluid Drag System with Friction Boost
  • 75mm Ball Leveling
  • Telescopic 2-Stage Magnesium Alloy Legs
  • Three-Fixed Position Leg Angle Locking
  • Leg Height Range of 9 to 64"
  • Legs Feature Twist-Locks
  • Spikes with Spin-Down Rubber Feet
  • Soft-Sided Carry Bag Included

The Miller DS-10 DV Fluid Head and Solo Aluminum Tripod with included pan handle and bag is a complete system that supports up to 11 lbs of cameras and accessories. The Miller DS-10 fluid head tilts from straight down to 75° tilting upwards, and 360° continuous panning with individual pan and tilt locks, and features a 75mm half ball for quick leveling, two counterbalance settings, fluid pan and tilt drag, and a sliding camera balance plate. The included articulating pan handle lets you adjust your grip whenever necessary.

The Solo 75 legs are made from magnesium alloy, providing a beneficial balance between strength, durability, and weight. It features a 75mm bowl for leveling, and integrated twist-locks for height adjustment. Combined with the three preset locking positions, the legs feature a height range adjustment of 9 to 64" (not including the height of the head). The included soft-sided carry case features padded carrying handles and allows you to store your head, handle, and legs for storage or transport.

DS-10 Fluid Head (75mm Ball Base)

The Miller DS-10 fluid head delivers the level of quality only found in more expensive (high-priced) heads, for today's compact digital camcorder shooters. Features a multi-step fluid drag system, an integrated counterbalance system combined with a sliding balance plate and a quick release and automatic locking system.

Multi-Step Pan & Tilt Fluid Drag System

The DS-10 fluid head incorporates Miller's multi-step Fluid Drag system ensuring smooth, consistent fluid drag control across all temperature ranges and through a wide range of light and heavy settings.

Preset Counterbalancing

The DS-10 uses a special designed counterbalanced system, to neutralize the effect of payloads and their centers of gravity.

Quick Release Camera Platform

This device is fitted with a precision, quick release camera platform that incorporates a sliding balance plate for fine tune payload balancing.

Safe at Any Temperature

Pressure or temperature does not influence the damping system, it has an operating range from -40°F to +149°F, and works without friction.

Solo DV Aluminum Tripod w/75mm bowl

The Miller Solo DV aluminum tripod is a unbraced ultra-light support meant for rapid setup and breakdown while supporting a substantial load of 44 lb (20 kg). The industry standard 75mm bowl will accommodate many fluid heads, and the spiked legs wind-down rubber pads assure the best footing no matter the terrain.

  • Ultra rigid aluminum alloy and magnesium design
  • 3-position Leg Angle locking - no spreader
  • Spike or wind-down rubber feet

681 Pan Bar Handle for Select Video Heads

This Miller Pan Bar Handle is compatible with the Miller DS5, DS10, DS20, and Miller Compass 23 fluid video heads. It connects and locks into either side of those heads with a clamp and bolt for right- or left-handed use. A rubberized handle provides a comfortable means to move its aluminum-alloy shaft, which measures 15.4".

This angled pan bar handle can rotate within its clamp, allowing a downward-pointing orientation for right or left-handed use.

1518 Soft Tripod Case

The Miller 1518 Soft Tripod Case is a padded tripod carry case designed for the Miller DV Solo tripods. It has a Water-resistant nylon fabric with zippers on the bag and the outside pocket. The case is carried by interlocking carry handle straps.

  • Soft padded tripod case
  • 1 large outside pocket
  • ID window

Compatible with:

  • Miller DV Solo Tripods
More Information
SKU 99153
Specifications

DS-10 Fluid Head (75mm Ball Base)

Camera Plate
Camera Plate Features Sliding Balance Plate, Quick Release
Camera Mounting Screw 1 x 1/4"-20 Male
1 x 3/8"-16 Male

 

Tripod Platform
Base Mount 75 mm Half Ball

 

Pan & Tilt
Drag Control Continuous
Vertical Tilt +90° to -75°
Panning Range 360°
Independent Pan Lock Yes
Independent Tilt Lock Yes

 

Physical
Load Capacity 11 lb / 5 kg
Counter Balance Incremental 2-Step (10 lb / )
Bubble Level 1
Operating Temperature -40 to 149°F / -40 to 65°C
Weight 3.4 lb / 1.5 kg

 

Packaging Info
Box Dimensions (LxWxH) 18.0 x 7.0 x 5.0"

Solo DV Aluminum Tripod w/75mm bowl

General
Head Mount Type 75 mm Bowl
Load Capacity 44 lb / 20 kg
Maximum Working Height 63.5" / 161.4 cm
Minimum Working Height 9.2" / 234 mm
Folded Length 27.6" / 700 mm
Materials Aluminum
Weight 6.6 lb / 3 kg

 

Legs
Leg Lock Type Twist Lock
Independent Leg Spread Yes
Leg Sections 3
Feet Features Retractable, Spiked

 

Packaging Info
Box Dimensions (LxWxH) 37.5 x 12.7 x 10.5"

681 Pan Bar Handle for Select Video Heads

Compatibility Miller DS5 Video Head
Miller DS10 Video Head
Miller DS20 Video Head
Miller Compass 23 Video Head
Material Aluminum alloy with rubberized handle
Length 15.4" (39.1 cm)
Weight 0.6 lb (0.3 kg)

 

Packaging Info
Box Dimensions (LxWxH) 18.2 x 6.6 x 6.4"

1518 Soft Tripod Case

Carrying/Transport Options Connecting Handles
Type of Closure Zipper
Exterior Material Nylon
Padded Yes
Interior Dimensions H: 7.0 x W: 7.5 x L: 34.0" / H: 17.8 x W: 19.1 x L: 86.4 cm
Weight 1.6 lb / 0.7 kg

 

Packaging Info
Box Dimensions (LxWxH) 37.0 x 12.5 x 10.5"

Related products

Customer Reviews
Copyright © 2019 Filmtools, a Magnasync/Moviola Company.