Miller Skyline 90 HD 1-Stage Alloy Tripod System with Off-Ground Spreader

  • Skyline 90 Fluid Head, 165 lb Payload
  • Heavy-Duty 1-Stage Alloy Tripod
  • Dual Telescoping Pan Handles
  • Off-Ground Spreader
  • Wedge Plate Assembly
  • Mitchell Screw/Nut Assembly
  • Protective Transport Case for Fluid Head
  • Hexagonal Transport Case for Tripod
  • Continuous Counterbalance
  • 15+0 Steps of Pan and Tilt Drag

The Miller Skyline 90 HD 1-Stage Alloy Tripod System with Off-Ground Spreader includes two pan handles, rubber feet, a wedge plate assembly, Mitchell screw/nut assembly, protective transport case for the fluid head, and a hexagonal transport case for the tripod. The Miller Skyline 90 is an impressive heavy-duty Mitchell flat base system with a spreader that sits just above the ground, leaving the tripod feet available for use. With support of up to 165 lb payloads, the included Skyline 90 fluid head offers continuous counterbalance at 12" above the tilt axis and 15+0 steps of pan and tilt drag. Even the most compact and lightweight cameras can be swapped in when necessary with counterbalance, pan, and tilt all capable of being set to zero. Additionally, the HD 1-stage aluminum tripod legs feature two leg sections and are adjustable between 24.6 and 51.6" of working height.

Skyline 90 Fluid Head

The Miller Skyline 90 Fluid Head is designed to support large cine cameras and rigs weighing up to 165 pounds. While most camera rigs don't weigh that much, even smaller camera rigs can take advantage of the smooth and accurate mechanics offered by the Skyline 90. Pan, tilt, and counterbalance all have zero settings, and the counterbalance can be continuously adjusted from 0-100% for fine-tuning the head's feedback. Pan and tilt drag settings each have 15 recallable click settings. Camera mounting is done by the sliding plate. Once secured to the base of your camera or rig, slide it along the Skyline 90's 11.8" of platform space. Dual telescoping pan handles are included.

HD Tripod

Designed for the Skyline 90 fluid head, the Miller HD Tripod is built to withstand heavy loads up to 309 pounds. The single stage design features robust rotating clamp locks, and a durable chrome finish. For working on studio floors or uneven surfaces, respective ground and off-ground spreaders are available separately.

Off-Ground Spreader for HD Tripod

The Miller Off-Ground Spreader for HD Tripod is a heavy-duty mid-level spreader that can be used with the 3350 HD Tripod on even or uneven surfaces.

Hexagonal Transport Case for Heavy Duty 3350 Tripod (Black)

Store, transport, and protect your Miller, heavy-duty 3350 tripod, or similar sized stands and other gear with the black Hexagonal Transport Case from Miller. This sturdy case is constructed from molded ABS plastic and has woven nylon straps with steel rivets for secure closure. Users will appreciate the side grab handle and upright case standing ability.

3366 Heavy Duty Feet for Heavy Duty Tripod (Set of 3)

The three 3366 Heavy Duty Feet for Heavy Duty Tripod from Miller are made of molded plastic with a rubber pad and attach via a stud that has both 1/4"-20 and 3/8"-16 threads.

Wedge Plate Assembly

Mitchell Center Screw & Nut Assembly

Case for Skyline 90 Fluid Head

More Information
SKU 99216

Skyline 90 Fluid Head

Camera Plate
Camera Plate Type Wedge Plate
Balance Plate Sliding Range 11.8" / 30 cm

Tripod Platform
Base Mount Mitchell Flat Base

Pan & Tilt
Drag Control Pan: 15-Step Plus 0
Tilt: 15-Step Plus 0
Vertical Tilt +60° to -60°

Load Capacity 0 to 165.4 lb / 0 to 75 kg
Counter Balance Continuous Plus 0
Center of Gravity 13.1" / 33.2 cm
Operating Temperature -40 to 149°F / -40 to 65°C
Dimensions 13.2 x 12.8 x 13.8" / 33.3 x 32.4 x 35 cm
Weight 50.7 lb / 23 kg

 HD Tripod

Head Mount Type Mitchell Flat Base
Load Capacity 308.7 lb / 140 kg
Maximum Working Height 51.6" / 131 cm
Minimum Working Height 24.6" / 62.5 cm
Materials Aluminum
Weight 19.8 lb / 9 kg

Leg Sections 2

 Hexagonal Transport Case for Heavy Duty 3350 Tripod (Black)

Material Molded ABS plastic
Type of Closure Woven nylon straps with steel rivets
Carry/Transport Options Side handle
Interior Dimensions 11.0 x 30.7" / 28.0 x 78.0 cm
Exterior Dimensions 11.4 x 36.0" / 29.0 x 91.5 cm
Weight 11.5 lb / 5.2 kg

 3366 Heavy Duty Feet for Heavy Duty Tripod (Set of 3)

Dimensions 3.2 x 1" / 8 x 2.5 cm
Weight 12.4 oz / 350 g

Related products

Check items to add to the cart or

You may also be interested in

Customer Reviews
Copyright © 2019 Filmtools, a Magnasync/Moviola Company.